Help to configure my Dsl Router!!!?

Question

i'm connected to internet via a NAVINI UNWIRED Ripwave modem. (http://www.navini.com/Website/Content/Products/Ripwave_MX_2.5_-_2.6GHz.htm )
i would like to connect it to my Prolink WGR1004 Adsl Router. ( http://www.fida.com/products/wgr1004.htm)
the problem is that i've done all recommended configuration but it's only a few time that i got connection to internet via the router. most of the time the router doesn't detect the modem. it says " searching for IP add from DHCP Server"
i have automatic IP address provided by my ISP when i'm connected directly to my modem to the internet.
if everything is ok and that i'm able to use internet via my router which is connected to the modem, as soon as any device is switch off, it didn't work anymore.. once more i have to connect and disconnect my modem to my router until i finally work... I'm bored with this trial n error...
if anyone could help me please...

Answer 1

First of all, from what I gather, your service is not DSL, it's WiMAX!

My first guess is that your modem is not set to reconnect automatically on disconnect. But in any case, if the broadband connection is PPPoE, it would be much better to set it up inside the router instead of choosing DHCP.

Answer 2

I think I can help you by giving you a site link that deals with software poblems....! An internet connection can become slow or stop working due to a number of reasons depending on the type of the connection. Many of the problems can be solved by making software changes or small hardware corrections. Detailed instructions at http://tinyurl.com/yl62gz

Answer 3

Look on the bottom for a ip address type it in and configure.

Answer 4

You probably need to use the PPPoE type connection (unless you did not use this when you connected from your computer directly). Then you would need your USERNAME and PASSWORD for the account.