ripp it? like cut one little slit and then rip the rest very carefully so u dont rip up
2006-10-11 14:36:00
·
answer #1
·
answered by bun 3
·
0⤊
0⤋
Undo the hem, the very carefully (with a sewing awl if you have one ) ( or use a needle, something with a little point so you can grab that one thread ) pull the threads out; if you do it right the bottom will basically start to unravel and look shredded.
2006-10-11 21:41:02
·
answer #2
·
answered by Lola 6
·
0⤊
0⤋
fold it across till the seams over lapped along the bottom then cut som odd triangles out of the bottom and rip the seam also then just wash and iron the edge should be rough like its a witches ragged dress
2006-10-11 21:36:22
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
if you don't actually want to harm it by ripping or cutting; try using safety pins to pin up a 'hem' at varying lengths. this will make it look choppy even more choppy if you press it.
2006-10-11 21:39:49
·
answer #4
·
answered by littleminx 3
·
0⤊
0⤋
Razor blade
2006-10-11 21:38:09
·
answer #5
·
answered by cheryl4785 2
·
0⤊
0⤋
Take the hem out and keep foolin with it to make it look tattered.
2006-10-11 21:37:14
·
answer #6
·
answered by jesus_freako_13 2
·
0⤊
0⤋
cut it with scissors or a knife and wash it
2006-10-11 21:34:16
·
answer #7
·
answered by dnrmartin95 2
·
0⤊
0⤋
tie it to the back of a truck and drag it for about thirty miles.
2006-10-11 21:37:25
·
answer #8
·
answered by ROOSTER 1
·
0⤊
0⤋
cut it with bad scissors...........
2006-10-11 21:41:33
·
answer #9
·
answered by Ninja3 2
·
0⤊
0⤋