Razor blade. Then vinegar & water to get the glue off.
2006-10-11 13:13:07
·
answer #1
·
answered by lottie 3
·
0⤊
0⤋
I removed the window tint from my van and I bought some of that window tint remover liquid which was a waste of money. What you need to do is get one of those razor blade scrapers and about 20 razor blades. Each blade is only good for a few scrapes and then you have to put in a new one and you will get that tint off in no time. I think I used rain x to get what little glue there was off but its been awhile. The trick is lots of razor blades and change them often.
2006-10-12 00:18:23
·
answer #2
·
answered by Captleemo 3
·
0⤊
0⤋
Saw tint remover at Walmart. Razorblade?
2006-10-11 13:09:32
·
answer #3
·
answered by sabor69 3
·
0⤊
0⤋
i own a repair shop,and do a lot of this,you take a real hot wet rag and get it started from the edge,most of it will peel off and the glue mess you have to take a good clean razor blade and some Windex to get it off,it sort of just rolls off on big gob's sometimes ,but it will come off,it takes a little while to get is started off though,good luck i hope this help,s
2006-10-11 13:07:34
·
answer #4
·
answered by dodge man 7
·
0⤊
0⤋
I used glass cleaner and a razorblade to remove my tint, then i used acetone to remove the glue.
2006-10-11 16:56:38
·
answer #5
·
answered by pro2340 1
·
0⤊
0⤋
the easy way is with a heat gun or a blow drier warm it up some and peel it off.you will still need to probally use a razor scraper on some spots
2006-10-11 13:07:00
·
answer #6
·
answered by wmb1200 2
·
0⤊
0⤋
Razor blade.
2006-10-15 08:52:58
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
all of these answers are great and have worked for me or a buddy of mine in the past.
2006-10-11 17:09:02
·
answer #8
·
answered by Anonymous
·
0⤊
0⤋