I am using an OLD sears kenmore. For some reason the thread keeps coming out of the needle when I try to sew.
2006-10-11 09:41:18 · 7 answers · asked by kristina 3 in Games & Recreation ➔ Hobbies & Crafts
Maybe the tension is too tight. Or the thread is too old and brittle. Are you sure you threaded it right? Mine needs to be threaded from front to back.
2006-10-11 09:43:51 · answer #1 · answered by phoenixheat 6 · 0⤊ 0⤋
My thread catches like that as quickly as I extremely have the bobbin in backwards. i will in no way remember which way it is meant to bypass in, so a minimum of thrice out of each and every 4 that I ought to rethread my bobbin it does that. The bobbin holder on my device is likewise getting somewhat worn; i'm useful that must be a piece of the concern as properly.
2016-11-27 22:21:06 · answer #2 · answered by reader 4 · 0⤊ 0⤋
It's not threaded correctly, the tension is too tight or your machine may need oiling if its an old machine. You may also try pulling the top thread out further ..say about 9 inches ..before you begin to stitch.
2006-10-11 09:51:11 · answer #3 · answered by Anonymous · 0⤊ 0⤋
I have an old singer sewing machine. Try checking the tension. The rethread the machine. Also a good point, make sure you are using the correct thread for the material.
2006-10-11 09:44:13 · answer #4 · answered by Anonymous · 0⤊ 0⤋
I'd check the bobbin and put it in again. Than re-thread
the needle, check your tensions for that type of material.
Sometimes, it is all that is needed.
2006-10-11 15:04:07 · answer #5 · answered by tychi 4 · 0⤊ 0⤋
i just went though this. THE BOBBIN IS IN WRONG!:]]] when you hold the bobbon in your hand, when the thread is hanging out, and when you pull it, make sure the bobbin spins clockwise. this i believe is your problem.
2006-10-11 09:46:26 · answer #6 · answered by angel76 2 · 0⤊ 0⤋
probably not threaded correctly
2006-10-11 09:42:49 · answer #7 · answered by JUNONNKI 3 · 0⤊ 0⤋