i have enabled cd rom in bios setup and connected it properly but its not detect by system plz solv it.
2006-10-11 08:14:23 · 9 answers · asked by parvez khan 1 in Computers & Internet ➔ Hardware ➔ Desktops
You should ask Helpero :http://www.helpero.com/ask-helpero
Helpero is a site specially designed for computer related problems.
You can search questions there in a very large database. If your answer is not there you can ask the specialists for FREE.
Visit Helpero here:http://www.helpero.com .
2006-10-11 08:18:09 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Uninstall then reinstall. If it does not artwork, setting up the driving force if u nevertheless have the disks that got here with the computing device or try the setting up the driving force by making use of way of the dell internet site. If u r able to replace or reinstall issues w/o a difficulty & it nevertheless does not artwork it skill the CD Rom force needs alternative.
2016-10-19 05:23:42 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Did u save the settings properly. And go to the windows it can not detected after that go to the Device magager check it and enable the drive
2006-10-12 22:53:17 · answer #3 · answered by shanmuga s 1 · 0⤊ 0⤋
Assuming that the CD drive is IDE, check that the jumpers are correctly set to master or slave. If they are conflicting with another device on the same IDE channel then it will not be detected.
2006-10-11 08:17:20 · answer #4 · answered by dewcoons 7 · 0⤊ 0⤋
check the cd rom settings in device manager. also make sure that the ide pins on cd drive are proper.
2006-10-13 01:07:09 · answer #5 · answered by Pulsared!! 1 · 0⤊ 0⤋
make sure that it is on slave if a hard drive is the master which i assume it is.... or if there is another cd drive that is already the master.
If that is fine.... go to your device manager and see if it shows up there.
There is always the possibility of a bad cable.... make sure its plugged in properly.
2006-10-11 08:57:11 · answer #6 · answered by danielrosborne 4 · 0⤊ 0⤋
Try deleting the device thru device manager. Then restart your PC. Windows should pick it up.
2006-10-11 08:19:05 · answer #7 · answered by Anonymous · 0⤊ 0⤋
cdrom is conected to ur computer.after that we check the connections of the jumper.otherwise we addhardware`utility
2006-10-12 00:24:28 · answer #8 · answered by rajesh k 2 · 0⤊ 0⤋
dont know, sorry
2006-10-11 08:25:46 · answer #9 · answered by elenitsa!!!! 1 · 0⤊ 0⤋