Does anyone know what machine is used in the modern day to spin cotton?

Question

Please help!

(What it is called)
thanks 4 ur help

Answer 1

Modern powered spinning, originally done by water or steam power but now done by electricity, is vastly faster than hand-spinning. http://en.wikipedia.org/wiki/Spinning_(textiles)


Modern Spinning Plant
A visit to Giemme Filati S.p.A., coordinated by Savio Macchine Tessili S.p.A., offered a look at some of Savio’s latest developments, as well as a discussion with Giemme Filati’s president, Giovanni Muratori.

Giemme Filati is a modern spinning plant with 10,000 spindles for cotton yarns, plus three machines for core-spun elastomeric yarns. All machines are equipped with Savio ORION I link winding. The company also has facilities for twisting, singeing, mercerizing and dyeing (6,800 pounds per day for socks and high-quality underwear). Giemme Filati also owns a spinning mill in Paraguay.

A major concern for the company is the competition from imported yarns. To offset the variations in pricing between in-house yarn and yarn imported from India, Giemme Filati not only spins 16,000 pounds per day, but also finishes 20,000 pounds of yarn sourced from India, Russia and Egypt (40s to 80s Ne).

Savio has had recent success in the United States with sales of winding machines and installations of rotor-spinning and Espero Volufil bulking units for acrylic yarns. The Italian textile industry has seen a major downturn, and 90 percent of Savio machinery is exported, with the largest market presently being China and Turkey.

Three developments were highlighted. Various types of splicing units can be incorporated into the winder. Of particular interest is the Twinsplicer, a mechanical system that can splice not only denim yarns, but also compact and core-spun elastomeric yarns. The splicing of elastomeric yarns was demonstrated in the spinning rooms at Filati.

A system has been developed to identify the spindle that produces the yarn being wound on the link-winding machine. Because there is a package transfer system in the passage of the spinning tube to the winder, it is necessary to communicate the new location to the tracking system. It is believed the use of such systems should greatly improve the identification of spinning positions that are producing defective yarns and thus may need maintenance.

Savio is set to launch a rotor-spinning machine that uses a spin box from Spindelfabrik Suessen, Germany, instead of its traditional self-pumping rotor. This should enable significantly higher production speeds. Suessen has been very active in improving its components to enable the production of higher-quality yarns.



Long-Staple Processing
Sant’Andrea Novara S.p.A. is, along with Cognetex S.p.A. and Seydel, part of the Finlane Group. Sant’Andrea has been a significant player in the manufacture of machines for long-staple processing, and in particular for the processing of fine wools. Its major markets currently are China, Turkey, Italy, Mexico and Iran. The group claims to be the largest manufacturer of long-staple processing machinery. While Sant’Andrea does not manufacture spinning frames, Cognetex offers a range of machines. Thus, the group can provide turnkey operations. The major developments presented by Sant’Andrea follow.

The new P100 comb operates under a new combing law. Main features include continuous feed, simplified design and increased operating speed. The comb has been designed with minimum motion of the various components. Not only does this afford potentially higher speeds, but it also has resulted in significant improvements in setting times for the various units within the comb, coupled with easier and quicker component change.

The HC 22 ARE pin drafter (Chain Gill) twin-head drawing frame is equipped with double electronic autoleveling. As well as having the more usual open-loop system to measure and correct the feed, this machine also is equipped with the Tex-Detector closed-loop system, which measures and corrects the outgoing sliver. Additional features of note are the 30-millimeter (mm) front ratch of the drafting system and the reduced distance of 4 mm between successive rows on intersecting pins in the drafting zone. Both of these modifications should lead to improvements in sliver quality.

Sant’Andrea claims 80 percent of the world market share for vertical rubbing frames. The RF4 Vertical Rubbing Finisher is its latest version. The use of a double rubbing field doubles the amount of rubbing at a particular running speed, and thus the rubbing section can potentially run at a lower oscillation rate to maintain an acceptable compaction of the roving. In addition, the second rubbing zone can reinforce the “dead centers” that occur at the reversal of the rubbing aprons when only one apron set is used.


Compact Spinning Centers
Cognetex currently has about 45 percent of the world market for long-staple ring frames, with Turkey accounting for about 50 percent of its sales. Its major focus recently has been the development of a compact spinning system for worsted spinning. The Com4® Wool system is the result of significant development based on Rieter’s Com4 system for cotton fibers. Major changes have been made to accommodate much longer fibers. This is achieved by utilizing angled balloon rollers as the front rollers in the compacting zone. The usual benefits for compact yarn are gained with this system — improved hairiness, regularity, strength, elongation and abrasion resistance. However, the claimed advantages are associated with the impact of these benefits in subsequent processing.

One particular claim is that it may be possible to replace folded wrap yarns with a single Com4 Wool yarn. The system is incorporated into a machine using suppressed spinning balloons claimed to work well in conjunction with the compact drafting unit. An additional cover, termed the air conveyor, is used for certain fiber types. It is recommended for use when processing cashmere, but is said to be unnecessary for wool.


Spinning Plant Automation
U.T.I.T. Wagner Automazioni S.p.A. operates as a design and assembly company. It sources parts and components and then applies minor modifications to ensure a unified system.

The company presently works either directly with the customer or through a machinery maker. The company offers many forms of material handling for different areas of the textile industry and is particularly well-known in staple spinning. Systems offered include:
• bale handling;
• transport systems for sliver cans, comber laps and rovings;
• complete material handling systems, from spinning/winding through palletization;
• filament-package handling; and
• textile roll handling and palletization.

U.T.I.T. has several installations operating in the United States, particularly can and roving transport, and yarn-package handling systems. The latter systems can accommodate output from up to 23 machines. The setup includes automatic package assessment for diameter, weight, conicity and yarn tail. It is possible to handle different yarns from the different spinning machines feeding the system. Research is underway to track the spinning position that is producing any defect detected by the package inspection system.

Gualchierani Textile Automation S.p.A. has two main areas of focus —bale presses (including presses for making bump tops) and automation.

The company proudly explains the project planning, research, construction and installation are all conducted in-house. Its major sales are to the Czech Republic, Turkey, China, India and South America.
Gualchierani currently has interests in the following areas of material handling:
• robotic plants for partially oriented yarn, fully drawn yarn, bulk continuous filament, and other yarns from spinning through inspection to palletizing and storage, including package inspection and labeling;
• staple processing automation from spinning and winding through boxing and palletizing;
• handling of packages in the dyehouse; and
• warehouse automation and associated logistics.

June 2003
http://www.textileworld.com/News.htm?CD=1875&ID=5204

Answer 2

I honestly have a cotton candy device :D The sugar is placed right into a receptical in the midsection, the place this is heated till it liquifies. It then shoots out of little holes alongside the exterior of the receptical, the place cool air cools it, and the 'strings' of liquid sugar get blended with air and 'solidify' into cottony goodness. i like my device in spite of the shown fact that it takes continually to warmth as much as the final suited temperature, and the sugar receptical isn't elementary to scrub. And it stinks if there is burnt sugar in it!

Answer 3

a modern spinning machine

Answer 4

I think it's still the cotton jinny or jenny!!

Answer 5

THE SPINNING JENNY

Answer 6

i'll get back to you on this one....