English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have an hp pavilion4900. I'd like to be able to carefully snap it off, get out whatever is blocking it from working, and reattatch it without breaking my computer keyboard. Please help.

2006-10-10 16:32:23 · 3 answers · asked by peaceseeker 2 in Computers & Internet Hardware Laptops & Notebooks

3 answers

yes you can do that. take a tool, best is a little screwdriver or a knife and then put it a little under the key. now press the other end down very carefully using a key beside the defective one until it snap off (protect the keys beside with some paper). now remove the what is blocking it, whatever it is.
reattaching the key is a bit more difficult. take a pin or needle and push the spring down, from a corner of the key. with the other hand take the key and press it on the spring until you hear a click. after that release the pin. probably you have to try this several times.
turn off the laptop, remove it from the outlet and also remove the battery before doing it. good luck.

2006-10-10 17:03:21 · answer #1 · answered by frime 6 · 0 0

go to ur local office superstore(staples) and they should have a speacial tool for taking off a keyboard on a laptop and if ur too afraid that ur gonna break it maybe u should pay them some money to do it or ak a friend thats good with technology.

2006-10-10 23:35:24 · answer #2 · answered by 9buzz 4 · 0 0

nope you dont want to do that at all on a laptop keyboard you will break it on desktop pc keyboard you can on laptop nope ,call hp-support

Clean the Keyboard
If a small vacuum cleaner with a brush attachment is available, use it to clear the keyboard of debris. A can of compressed air can be used to blow out particles that get in between the keys.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00292159&lc=en&cc=us&dlc=en&product=500513&query=4900


HP computers no1 they have the verry best recover system of all

click on start /all programs
in the list go to pc help & tool
then click on
hp-pc- recovery tools-cd
noW click on
creat the recovery tools cd
use a cd(r) disk ...to creater the pc tools cd
then click next
and wait for it to creat a
system tool recovery cd
do not stop it at all
when the system tools
cd is created your have
a system recovery tools
cd- this cd will reinstall
all the software that came with the pc and
now coz we have reset the software it will
restall the software that is on the pc and
reinstall windows xp home and set it back up
windows xp will be reinstalled and set back up

the
hp-pc-tools cd
this just reinstall's the software that was on the
the hard drive at the time you buy the pc it will also
install windows xp. os .with out asking for the windows xp cd
creat multiple partitioins




hp-pc-dvd revovery creater cd
click on start /all programs
in the list go to pc help & tool
then click on
hp-pc- recovery creater cd
use a dvd (r)disk .do not stop this till the .hp-recovery .creater cd's have been made.then your have your .hp-recover creater cd's



what.hp-creater cd's do
hp-pc-dvd revovery creater cd
use a dvd(r) disk
to create the revovery creater cd
you will have 2 options
options 1: to just install the windows xp & the software that was on
the hard drive from day 1 without for mating the hard drive
options2: will format the hard drive
and reinstall windows xp with out asking for the windows xp cd
& install the software that was on the pc from day1




hp-cd's & windows & product key cd
your windows product key
can be fond on the side of the pc or on the top
or at the back of the pc
now its best to write that windows product key
and keep it in a safe place

and put that windows product key in to a notepad
and copy the notepad
to a back up cd put the
product key cd. in a safe place with windows xp & the hp-pc-recovery cds
all in a safe place

now you can make back up copy's of the recovery cd's you have made
with the hp.cd creater cd's you use sonci my dvd to make copy's of them cd's
with hp-pc-recovery cd you can use windows burner or sonic my dvd
to make a back up copy of that cd
then make them as the cds for what they are but make as back copy cd's
then your not get any of them mixed up then put them all in a safe place/with
windows xp cd so no one can damage them

2006-10-10 23:37:23 · answer #3 · answered by Anonymous · 0 2

fedest.com, questions and answers