I put the dish washer on and then after about 3 mins it bleeps continuously until i open it. The flap hasnt opened to let the tablet out, the dishwasher has plenty of salts in it and the filter isnt blocked. The power light flashes when i open it when bleeping and in the manual it says its something to do with the filter but i have checked and nowt is wrong....
Help Its Driving Me Mad....
2006-10-10 02:26:00 · 6 answers · asked by Anonymous in Home & Garden ➔ Cleaning & Laundry
The same thing happened to me, if it doesn't reset, it could be the computer chip has gone and you'll probably need a repairman in to set it straight. You may need a new panel in the front. Sometimes you can purchase parts on the internet more cheaply if you know what is needed and have a part number, but in most cases, unless you are familiar with dishwashers, you are better off waiting for a repair.
Best of luck to you...
2006-10-10 02:44:05 · answer #1 · answered by Anonymous · 0⤊ 0⤋
My dishwasher has a mind of its own too, mine only has one button to press to select what temperature etc I hold this button in for about 20 seconds and then it beeps and all the lights flash and it seems to reset itself, so try holding in a button for a while, sorry I cant be more technical. Good Luck I hate doing the dishes :o)
2006-10-10 02:36:38 · answer #2 · answered by bez 4 · 1⤊ 0⤋
Put dishes in sink. Run hot water tap. Squirt of Fairy Liquid. Rub dishes with cloth. Place on draining board. Save planet.
2006-10-10 02:36:31 · answer #3 · answered by Anonymous · 0⤊ 1⤋
Its a technical fault call help line
2006-10-11 05:40:39 · answer #4 · answered by GLYN D 3 · 0⤊ 0⤋
Make sure the drain hose isn't restricted.
2006-10-10 02:47:04 · answer #5 · answered by who_me? 2 · 0⤊ 0⤋
call a repair man
2006-10-10 02:36:32 · answer #6 · answered by Reevo 1 · 0⤊ 0⤋