2006-10-09 14:32:32 · 5 answers · asked by James M 1 in Cars & Transportation ➔ Maintenance & Repairs
What engine does it have in it? If it's the 5.4L V8 or 6.8L V10 it takes a Motorcraft Oil Filter FL-820-S and 6.5 liters of 5W30. If it's equipped with the 7.3L DIT V8, it takes a Motorcraft Oil Filter FL-1995 and 15 liters of 15W40. Size of wrench needed for the drain plug on the gasoline engines is a 16mm or 5/8. And for the diesel engine it's a 19mm or 3/4. Hope this helps. Good luck.
Note: 2001 is the first year Ford switched to using 5W20 engine oil in all their gasoline engines with the exception of the 4.0L SOHC engine which still uses 5W30. My mother's 2001 Toyota Corolla takes 4 quarts of engine oil, so it's pretty safe to say that your Excursion would take more than that amount.
2006-10-09 14:53:44 · answer #1 · answered by Anonymous · 0⤊ 2⤋
v-8 and V-10 gasoline is 6 qts. 5w20oil with a filter
Powerstroke is 15 quarts with filter change...
On the powerstroke it is critical it gets the 15 quarts as the engine oil runs the injectors that fire the motor and being 2 quarts low can cause the engine to run like crud...
2006-10-09 15:13:32 · answer #2 · answered by gearbox 7 · 1⤊ 1⤋
Check the owners manual. Look under Specs. it will also tell you what type to use.
2006-10-09 14:37:19 · answer #3 · answered by Daddy Big Dawg 5 · 0⤊ 0⤋
it should take around 4 quarts and maybe a little over that,if you have a owners manual look in it ,they tell the exact amount they take do so many that its hard for me to say for sure the owners manual always has it in there,good luck i hope this help,s.
2006-10-09 14:37:34 · answer #4 · answered by dodge man 7 · 0⤊ 5⤋
6 qts. desel 13.6
2006-10-09 14:36:09 · answer #5 · answered by natallbad 4 · 0⤊ 2⤋