im working on my project on building toy cars and i have already put 2 pieces of wood together to make a car shape but i dont know what to do for the wheels....!this project is do tomorrow and i really need help...!i would either need directions on specificly what to do or i will need websites that will give me alot of help!hhhhhhhhhhheeeeeeeeelllllllllllppppppppppp!plzzzzzz.....!
2006-10-09 05:06:46 · 4 answers · asked by alivia f 1 in Education & Reference ➔ Teaching
Use a dowel to make the axle. Then, use something that will hold the axle in place but still allow it to turn. (You might use a bit of wood with a hole drilled through--make sure the hole is big enough for the axle to fit and turn.) Finally, put the wheels on. Voila!
2006-10-09 05:10:30 · answer #1 · answered by bunstihl 6 · 0⤊ 0⤋
their are many ways to do the wheels you can drill through your block and attach your wheels that way or you can use wire and make 4 horseshoe shaped peaces and in-bed it in the wood instead of wire you can use wood staples to hold the axle in place or you can do it all from wood lol
2006-10-09 12:32:35 · answer #2 · answered by steamroller98439 6 · 0⤊ 0⤋
You need a simulator software to design & simulate the car body & CATIA for design the gears & you need electronic kits & motor & .......
2006-10-09 15:57:02 · answer #3 · answered by jetboy861 3 · 0⤊ 0⤋
try this website:
http://www.lowes.com/lowes/lkn?action=howTo&p=Build/ToyCar.html%20
**
2006-10-09 12:27:21 · answer #4 · answered by Edis 2 · 0⤊ 0⤋