2006-10-09 01:46:54 · 8 answers · asked by roberta r 1 in Cars & Transportation ➔ Maintenance & Repairs
perhaps 'phoning a Renault dealer might be a good idea. Whatever you decide on no account EVER fit a second hand cambelt. Be aware that some engines also need new tensioners and/or guide blades fitted at the same time and that a main dealer will warranty the work up to the cost of replacing your engine if it all goes wrong.
2006-10-09 01:57:36 · answer #1 · answered by wifi_wanderer 1 · 0⤊ 0⤋
I hope you're looking to replace one before it breaks, if it has broken it could be very expensive as some of the Renault engines are interference motors. This means if the belt breaks while the engine is running it can hit the valves that are not moving in sync with the engine. This will damage the valves and they require removing the head to change. Should the belt just need changing, any shop should be able to give an accurate estimate before doing the job.
2006-10-09 01:57:28 · answer #2 · answered by wrenchman1995 3 · 0⤊ 0⤋
If you're in the United States, it will cost about 150 - 160 dollars. The prices posted for the UK are about right when converted.
2006-10-09 02:59:26 · answer #3 · answered by Anonymous · 0⤊ 0⤋
i had a '97 megan my belt cost 35£ inc fittin but i went to da breakers yard to get the belt then sumwere diff to get it fitted i dont think u lookin @ more than 40 tops
2006-10-09 01:50:14 · answer #4 · answered by dx 1 · 0⤊ 0⤋
My Mum had her clio done inc: fan and p.a.s belt done for £95 in a small local garage.
2006-10-09 07:32:20 · answer #5 · answered by craigs @ peugeot 3 · 0⤊ 0⤋
the timing on your motor vehicle is each and every thing with how your motor vehicle runs. sounds did you verify the actuall timing on your motor vehicle after installation it i wish? or in case you have been messing with the spark wires b4 make beneficial your firing order is right too. in spite of the shown fact that it definatley basically appears like your timing is off. even nevertheless im assuming you timed it with a timing mild and each thing?
2016-12-08 11:24:41 · answer #6 · answered by ? 4 · 0⤊ 0⤋
just had it done on a 02 diesel model from arnold clark £240. go to a back street garage
2006-10-09 03:11:50 · answer #7 · answered by Rolfe66 3 · 0⤊ 0⤋
I would expect to pay about £100 in my area (North Wales)
2006-10-09 01:50:57 · answer #8 · answered by Anonymous · 0⤊ 0⤋