LAPTOP
celeron M 1.4 GHZ
512 MB DDR1 PC3200 400 MHZ
I WILL BE USING CLOCKGEN SOFTWARE TO OVERCLOCK
MY CORE LOGIC IS : SiS M661MX + 963L
IS THERE A NEED TO KNOW THE MAX. FSB OF MY MOTHERBOARD?
2006-10-08 08:30:45 · 3 answers · asked by dct695 1 in Computers & Internet ➔ Hardware ➔ Laptops & Notebooks
If wil save you some time. Most people overclock until it breaks, then back off until it works, hoping nothing is permanently broken.
2006-10-08 08:54:40 · answer #1 · answered by Computer Guy 7 · 0⤊ 0⤋
Yes of course, because overclocking needs to be a synchronized calculation that involves the CPU, FSB, and Memory. Clockgen is really an experimentation system, and any changes really need to be done in the bios. If your laptop bios doesn't support overclocking, you're asking for trouble, as setting things permenantly with clockgen is a pretty dangerous hack.
Between the CPU and the FSB you have the clock multiplier. Adjusting this depends on your having a CPU that is unlocked. With the Celeron M that should be possible.
2006-10-08 12:44:27 · answer #2 · answered by Gizmo L 4 · 0⤊ 0⤋
you're over clocking through fact the Q6600 is two.4 GHZ with the aid of default now observing the version of your cpu as to how plenty you may wisely B0 and G0 are the two sequence G0 is amazingly Oc B0 will tank out at 2.8 neigbourhood the memory you're utilising is incorrect for the pc you would be utilising a minimum of 800 mhz PC2-6400
2016-12-08 10:50:37 · answer #3 · answered by ? 4 · 0⤊ 0⤋