i was told by an audi tec that it,s problably the wiring but it seems odd that all the other lights work
2006-10-08 07:33:17 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Audi
the techie could be right. Mostly all your wiring is on a seperate 'track' if your other brake light works, then its probably the direct wire to the bulb on the driver side and not further inside the system.
2006-10-08 07:43:02 · answer #1 · answered by twilight_pisces 1 · 0⤊ 0⤋
The problem may be in the bulb light assembly. Remove the tail light and then open it up take out all your bulbs and check the contacts on the bulb assembly if you see any black spots where the brake bulb goes that is your problem. If you have access to a volt meter douoble check the wire that supplys power to the brake bulb
2006-10-08 07:43:37 · answer #2 · answered by DIRKDIGGLER 5 · 0⤊ 0⤋
Bulbs are cheap so replace it anyway, just to be sure. Make sure the contacts in the bulb socket are clean. If it still doesn't work, its most likely the ground wire.
2006-10-08 09:40:36 · answer #3 · answered by carguy 4 · 0⤊ 0⤋
did you check the fuse ? it may be it
2006-10-08 07:57:09 · answer #4 · answered by stephanlegault 2 · 0⤊ 0⤋