I used a wood flooring adhesive to install my hardwood floor and there is a sticky residue on the surface. I need to know what will clean the surface.
2006-10-08 04:23:20 · 5 answers · asked by ernie02 1 in Home & Garden ➔ Maintenance & Repairs
You MUST look at the container the glue/adhesive came out of.If the warning is that only mechanical means after adhesive has cured is stated then you blew it,only sanding past the finished surface including re-staining will do.If that's not the case than determine if it's oil based or water based,then follow the directions such as some oil based products will require a verathane remover ,no matter what there's alot of "elbow grease" required GET TO WORK.
2006-10-08 06:10:17 · answer #1 · answered by charles b 1 · 0⤊ 0⤋
Read the glue bottle it should give instructions or contact the manufacturer for info.
2006-10-08 04:57:19 · answer #2 · answered by Ray W 2 · 0⤊ 0⤋
Whole milk, believe it or not. Not skim, or 1%, etc. Just put a little in a sauce dish, and dab it on with a clean rag.
2006-10-08 05:02:25 · answer #3 · answered by cowgirl 6 · 0⤊ 0⤋
you can actually get glue remover,
but i just use mineral spirits. doesn't seem
to hurt the finish.
2006-10-08 05:52:39 · answer #4 · answered by thekid 3 · 0⤊ 0⤋
Alcohol will do it.
2006-10-12 02:43:10 · answer #5 · answered by duc602 7 · 0⤊ 0⤋