2006-10-07 22:35:19 · 13 answers · asked by cupiddear 2 in Computers & Internet ➔ Hardware ➔ Other - Hardware
http://www.helpwithpcs.com/maintenance/mouse_problem_maintenance.htm
i am assuming you have a ball in your mouse
2006-10-07 22:38:52 · answer #1 · answered by Anonymous · 0⤊ 0⤋
if you have a ball mouse at the bottom you will see a rotating plate with a hole through which u can see the ball. turn it on the direction it is said and take out the ball and clean with some soft solutions or water.
else if you're having a optical mouse brush off the dust on the light glowing at the bottom.
2006-10-08 06:35:50 · answer #2 · answered by Shreyo G 2 · 0⤊ 0⤋
-twist the cover in the buttom of the mouse
-get the ball out
-clean it
-if you are a girl thn you have little fingers: you can put your forefinger inside the hall and start scratching the rollers while rolling them
-but if you are a guy then your fingers are large and the mission will be harder ... you can use your little finger to to scratch the rolers
good luck ... i will get you a new mouse on yur birthday
2006-10-08 12:35:07 · answer #3 · answered by adorable 4 · 0⤊ 0⤋
if it is laser mouse then no answer if simple then see down the mouse there wil be 2 arrows move that side and take out it and there will be a ball type it is so heavy take it out after it take out dust
i am a child of 11 so it can be any other mouse
or tell any body who works of comp.
2006-10-08 05:59:41 · answer #4 · answered by sahil chhabra 1 · 0⤊ 0⤋
All you need to do is take off the part around the ball on your mouse then clean the ball part itself with a damp cloth then dry it off completely replace it and snap it back together don't forget to unplug first!!
2006-10-08 05:46:34 · answer #5 · answered by noimok 2 · 0⤊ 0⤋
to clean mouse with ball in 3 months is common but if u r in mood to change i will prefer is IBM small sized optical mouse.Due to it's small size it is very comfortable for hands,U can get it from retailer around Rs.250 so try for this u will be happy on u'r decision.
2006-10-09 22:15:39 · answer #6 · answered by snrb_1 2 · 0⤊ 0⤋
try upgrading to an optical mouse or laser mouse, it won't cost alot and it's more accurate compare to a trackball mouse.and it doesn't need cleaning.
if you insist on using the trackball mouse,
make sure your working environment is clean , at least your mouse pad is free from dust.
2006-10-08 08:05:53 · answer #7 · answered by KCL 3 · 0⤊ 0⤋
I remember roller ball mice.... what a pain in the butt... buy an optical mouse. You never have to clean it and it always works perfect!!
2006-10-08 05:53:42 · answer #8 · answered by Lloyd 5 · 0⤊ 0⤋
Simple. Just open it and clean the ball and rollers with normal spirit, after unplugging from pc or with pc in power off condition
2006-10-08 05:38:58 · answer #9 · answered by mohanambady 2 · 0⤊ 0⤋
I think you are using mouse with roller ball.
It will always cause pblm's.
So try to cahnge it with optical mouse.
2006-10-11 21:11:42 · answer #10 · answered by Manoj A 2 · 0⤊ 0⤋