What do you call long? PCs are constantly getting faster and we get upset waiting 30 seconds.
If you have your system configured to receive automatic updates, they are downloaded to your PC while you are noodling around, but not installed until you shutdown. If you leave your monitor on for a minute, you might ge a message that Windows is installing updates and will shut off automatically. That's what mine does.
It could also mean that you have several programs open and Windows has to properly shut them all down one at a time.
2006-10-07 17:07:06
·
answer #1
·
answered by TheHumbleOne 7
·
0⤊
0⤋
There are several solutions, but try following:
1. Select shut-down from startup menu.
2. stand-by, turn-off and restart options will be displayed on
screen.
3. Then press shift key, stand-by will be changed to hibernate
option.
4. By holding shift key, click that option by mouse, and system
shut down rapidly.
See, this option can save current status of your system, such as program running, and load when restart.
2006-10-07 17:18:44
·
answer #2
·
answered by manoj 2
·
0⤊
0⤋
not a rapid answer for this. would desire to be numerous issues. Does it say that's lacking a document? i think of you will desire to take it to somebody that is conscious a thank you to repair it if it crashes for the time of an attempt fix. Take suggestion for fixing your workstation at your individual danger. in case you put in new gadgets attempt one million. suitable-click My workstation, click properties, click the Hardware tab, and then click gadget supervisor. 2. Double-click usual Serial Bus controllers to enhance it, suitable-click USB Root Hub, and then click properties. 3. click the potential administration tab. 4. click to sparkling the enable the workstation to instruct off this gadget to maintain potential verify container, and then click ok. If that did not paintings verify to be sure in the journey that your workstation is desperate to erase the device’s digital reminiscence and device hibernation cache at close down. to do this, enter the GPEDIT.MSC command on the Run instant to load the gang coverage Editor. Now, navigate via the console tree to workstation Configuration | homestead windows Settings | protection Settings | interior of sight regulations | protection recommendations. At this factor, detect the Shutdown: sparkling digital reminiscence Pagefile selection in the column to the splendid and determine that that's disabled. If this decision is enabled, you are able to disable it by utilising double clicking on the placing and selecting the Disabled selection. If that solves it large if not perchance that's a powering down situation. you may desire to objective: click [start up] [administration Panel] [overall performance and upkeep] [potential recommendations] the potential recommendations properties belongings Sheet will open. click the APM tab and verify the container to [enable progressed potential administration help] If that doesn't paintings be sure in the journey that your workstation exchange into detected as being ACPI enabled. suitable click My workstation then click properties > Hardware > gadget supervisor. improve the get right of entry to observed as workstation. If the get right of entry to is 'progressed Configuration and potential Interface (ACPI) workstation' you're waiting. If it says 'popular workstation' the workstation BIOS exchange into not detected as being ACPI in a position then take your workstation in and tell them your shutdown problems and enable them to appreciate the help for ACPI isn't put in.
2016-12-16 04:05:32
·
answer #3
·
answered by ? 3
·
0⤊
0⤋
if it takes that long then you have many processes/applications (perhaps unnecessary) running in the background...and they all have to end in order for windows to shut down.
you'd have to go to "msconfig" and disable some of those applications
2006-10-07 17:03:06
·
answer #4
·
answered by Chris™ 5
·
0⤊
1⤋
Unplug it.
2006-10-07 17:08:37
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋