i have changed the relay sensor that is located in the front and changed the relay switches in the fuse box ,my chiltons book said its located in the right front fender but i cant find it anywhere,the part i need to find looks as though it should be mounted on the fire wall some place it has a metal bracket on the back with what appears to be 2 screw holes .any help appreciated greatly.ps the fan is not burned out we wired it direct to see that was not the problem thank you
2006-10-07 12:24:17 · 4 answers · asked by outlawlady 3 in Cars & Transportation ➔ Maintenance & Repairs
i own a repair shop,and if you,ll look on the fire wall i think it mounts on it, its been a while since i done a jeep,but I'm pretty sure this is where its at,good luck i hope this help,s.
2006-10-07 12:40:19 · answer #1 · answered by dodge man 7 · 0⤊ 1⤋
Your Chilton's should have a picture of the location. If not look on the fender well either on the left or right. There should be a box with fuses and relays in it. If not there then look near the engine fire wall. It should be there some place. Other wise follow the wiring. You may have to contact your nearest dealer. They could tell you.
2006-10-07 12:30:10 · answer #2 · answered by bro_ken128 3 · 0⤊ 0⤋
You have the wrong part for a cooling fan relay. The correct item is square and has no bracket on it. It fits into a well in the relay and fuse box at the right (passenger's) side of the engine bay. If you remove the cover, it is clearly identified.
Good Luck
2006-10-07 12:55:03 · answer #3 · answered by Ironhand 6 · 1⤊ 0⤋
pop the hood it could be mounted under there behind the fender i know they are usually on drivers sides right behind the fender mounted by screws
2006-10-07 12:28:20 · answer #4 · answered by stackdaddy2001 1 · 0⤊ 0⤋