English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

7 answers

Make sure that you can connect to the Internet when you are hard wired to the router this will eliminate any chances that the router is not able to get on line. The next step is to make sure if there in any encryption on the router that you know what the key code is. In most cases when a computer connects to a wireless signal but is unable to get on the Internet is because the PC doesn't have the correct encryption Key.

2006-10-07 07:04:59 · answer #1 · answered by Rod is the coolest guy I know 2 · 0 0

Receiving the signal is one thing, connecting is another. You can receive any wireless network in range, but you have to obtain the IP address to connect to it.
Click Start, Settings, Network connections. Right click your network adapter and click Properties. Highlight Internet protocol (TCP/IP)and click Properties. Click the 2 options to obtain IP and DNS automatically. Click OK and try to connect again.

2006-10-07 07:15:04 · answer #2 · answered by eferrell01 7 · 0 0

This is usually because of encryption, you will need to check your router's and wireless adaptor's manuals to configure them to match together.

2006-10-07 07:06:50 · answer #3 · answered by juliepelletier 7 · 0 0

i had this happend 2 me once b4 wat u do is be particular u have each and every of the right wires in the right palce and if that dosnt paintings attempt skill up skill down it quite is the position u unplugg the router and the othere internet challenge and that would want to do it and if that dont paintings call the help line for the router

2016-12-04 09:18:09 · answer #4 · answered by geiser 4 · 0 0

wirelss signal and internet is different

your wirless signal is the LAN network conenction

chekc you habve your internet setup properly and that it's connected

2006-10-07 07:01:09 · answer #5 · answered by UKDealsBox.com 4 · 0 1

That's crazy, it seems to be working now (you wrote this message). Sorry, I just thought it was funny, I have no idea.

2006-10-07 07:08:28 · answer #6 · answered by Anonymous · 0 0

you conncet the ethernet cable to the back of the router on the port that is marked ethernet then you take the other end of the cable to the ethernet card on on the back of your pc you conncet it to the port marked ethernet

then you conncet the other cable to the back of the ruter port that is marked DSL then you take that cable to the modem box conncet it to the port marked on the modem marked DSL
then you conncet the modem cable box to your phoneline box
conncet the power cable to the router and put the power on
now you put in the cd driver that came with your router
and you install the network drivers
now you need to set up a network id & password on the router
you will be told how to do all that when you install the drivers & software for the router
when you have install the drivers and software fo r the router
your need to restart the pc
when your back at the desktop
you will see a network icon in the taksbar by the pc time
if it has a red X on it right click it and click on enable
if you dont see a network icon in the taskbar
click on start/control panel
click on
network and internet connections
icon
then click on network connections icon
now right click the
local Area connection
icon and click on properties
tick the box
show icon in notification ares when connected
tick the box
notify me when this connection has limited or no connectivity

now click on
then authentication tab at the top

tick the box
enable IEEE 802.1x authentication for network
tick the box
authenticate as computer when infomatiion is available
then right click
local Area connection
and click on enable
now your router internet will log online with in 45 seconds
when your router is online you conncet your phoncable to the modem marked
phone

now when your router is online

then you need to get in the router home page and click on the wireles lan icon
and you set up a network id for the laptop
and a security wpa key not a wep key dont use that one use wpa key
then you put a wireless usb adapter on the laptop you install the network drivers on the laptop for the wireless usb
then you click on the network icon in the taskbar by the time on the laptop right click on it go to properties then you click on view wireless networks then you click on advanced tab you put in the network id and security key that u set up on the router home back then you click apply & ok then you click on view wireless network's your see your network id click on that then click on conncet


if you have a wireless card in the laptop just

click on the network icon in the taskbar by the time on the laptop right click on it go to properties then you click on view wireless networks then you click on advanced tab you put in the network id and security key that u set up on the router home back then you click apply & ok then you click on view wireless network's your see your network id click on that then click on conncet

if your network cuts out at any time just right click the network icon by the pc time
and click on repair that is on the 2 computers you can do this then windows xp will repair the
network for you and it dont take long at all
if you cant set that up
your be better off if you get you (isp)server to help you set all that up



transfer files from pc2pc

have the 2 copmuters on the wirless network then
Dual login yahoo messenger files trasfer from pc 1 to pc 2

on pc 1 you login a yahoo id then on pc 2 you login another id
then you add to friends list then you get yahoo id 1 to pm yahoo id 2 then yahoo id pm back yahoo id 1 then you click on the send file icon then you send files from pc1 to pc 2
your send files over from pc 1 to pc 2 verry fast ,dont go in a chat room while your doing the file trasfer coz this will only slow down the trasfer

2006-10-07 07:01:12 · answer #7 · answered by Anonymous · 0 1

fedest.com, questions and answers