2006-10-06 05:32:26 · 5 answers · asked by c me 2 in Home & Garden ➔ Do It Yourself (DIY)
run level string lines then drill tapcon screws into the concrete everywhere along those lines so that the heads are all level. trowel out your cement to the top of the screw heads. work it baby work it. Use`a frezno style trowel it has round ends not the square one. and by the way you need to mix it regular like (plastic putty) it will loose it's strenghth if you listen to these people with there pancake batter and self leveling tile stuff that cars can't park on.
2006-10-06 15:00:30 · answer #1 · answered by Jack 5 · 0⤊ 0⤋
Erm... sand + cement = mortar. Concrete incorporates rocks/pebbles (reckoning on the use). purchase some waiting mixture concrete from a DIY shop. end of concern. 40mm deep? Will you throw down some hardcore first? feels like it quite is a job for some paving slabs which *can* be laid with little bit of mortar.
2016-10-15 21:57:29 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Have you considered using self leveling cement? You can find it at Home Depot.
2006-10-06 05:49:03 · answer #3 · answered by Kainoa 5 · 0⤊ 0⤋
FLOORING INSTALLERS HAVE A SELF LEVELING MIX THAT THEY PUSH AROUND WITH A SQUIDGY, & SAND THE NEXT DAY FOR LEVEL FLOOR TILE & VINYL INSATALLATIONS. IT ALSO HAS BONDING AGENTS.
2006-10-06 10:26:51 · answer #4 · answered by Bonno 6 · 0⤊ 0⤋
Youll wanna mix it like pancake mix,then you may have to trowel it on.
2006-10-06 05:42:43 · answer #5 · answered by gibbyguys 4 · 0⤊ 0⤋