what kind of light do plants need to grow?

Question

UVA? UVB? both?

Answer 1

It depends on what type of plant it is. Tropical plants need more direct sunlight (like a spider pant). You need to research the type of plant to see what type of light it needs.

Answer 2

Plants can grow in any type of light within the visible spectrum(white light). The intensity of light a plant can bear depends upon the species of the plant u have. For eg., indoor plants die on exposing them to sunlight. High energy radiations might just cause mutations and kill the plant,

Answer 3

plant lighing is measured by candle watts and need a certian # of hours depending on type and purpose.i.e. many fruiting types generally sprout during the spring[6-8 hours sunlight] grow and bloom[8-10] fruit[10-12] and then ripen as the season degrades back down to [8-6hours sunlight] process can be forced in a shorter time span using "Grow Lights" also good to force flowering and to grow sun loving plants in low light ares.

Answer 4

#1 Powerful Tactical Flashlight : http://FlashLight.uzaev.com/?ULLM

Answer 5

Ultra Violet .

Answer 6

Hope this Helps Good Luck !



Indoor Plant Grow Light Guide

HID Grow Lights | Fluorescent Grow Lights | Incandescent Grow Lights
Electrical Cost | Sunlight's Effect on Plant Growth


Horticultural lighting systems allow you to extend the growing season by providing your plants with an indoor equivalent to sunlight. This is a great advantage for those of you who appreciate having a year-round supply of fresh flowers, veggies and herbs. Artificial lighting is also a great way to jump-start spring by starting your seedlings months ahead of the last frost. There are three main types of horticultural lighting systems.

Light Output Comparison Chart

Each scenario above represents approximately 50,000 lumens.

HID (High Intensity Discharge) Plant Grow Lights

HID lighting is the most efficient way to convert electricity into light that is available to the consumer. There are two types of HID grow lights used for horticultural lighting:


Metal Halide - MH
Metal halide bulbs produce an abundance of light in the blue spectrum. This color of light promotes plant growth and is excellent for green leafy growth and keeping plants compact. It is the best type of light to be used as a primary light source (if no or little natural sunlight is available). The average lifespan is about 10,000 cumulative hours. The bulb will light up beyond this time but due to the gradual decline of light, it is not worth your while to wait for the bulb to finally burn out. If you compare their lumen (brightness) per unit of energy consumed, metal halides produce up to 125 lumens per watt compared to 39 lumens per watt with standard fluorescent lights and 18 lumens per watt for standard incandescent bulbs. View 100 to 400 watt HID grow lights, View 400 to 1000 watt HID grow lights






High Pressure Sodium - HPS
High pressure sodium bulbs emit an orange-red glow. This band of light triggers hormones in plants to increase flowering/budding in plants. They are the best grow lights available for secondary or supplemental lighting (used in conjunction with natural sunlight). This is ideal for greenhouse growing applications.

Not only is this a great flowering light, it has two features that make it a more economical choice. Their average lifespan is twice that of metal halides, but after 18,000 hours of use, they will start to draw more electricity than their rated watts while gradually producing less light. HPS bulbs are very efficient. They produce up to 140 lumens per watt. Their disadvantage is they are deficient in the blue spectrum. If a gardener were to start a young plant under a HPS bulb, she/he would see impressive vertical growth. In fact, probably too impressive. Most plants would grow up thin and lanky and in no time you will have to prune your plant back before it grows into the light fixture. The exception to this is using HPS grow lights in a greenhouse or in conjunction another light source that emits light in the blue spectrum. Light sources that have a high output in the blue spectrum like sunlight and MH grow lights offset any stretching caused by HPS bulbs. View 100 to 400 watt HID grow lights, View 400 to 1000 watt HID grow lights


HID Light Output
Primary Growing Area
Supplemental Growing Area
100 watts
2' x 2'
3' x 3'
250 watts
3' x 3'
5' x 5'
400 watts
5' x 5'
8' x 8'
600 watts
6' x 6'
10' x 10'
1000 watts 8' x 8' 12' x 12'


HID Lighting Helpful Tips
.Hanging height: Due to the heat that is emitted from these types of fixtures, you should hang them according to size. Smaller wattage systems (100 and 250) should be hung about 2 to 3 feet from the top of the plants. Medium wattage systems (400 and 600) should be hung around 4 feet from the top of the plants. High wattage systems (1000 and up) should be placed at least 4 to 6 feet from the plant tops.
.How long should lights run? This depends on the type of plant. Most plants and vegetables need about 10 to 12 hours of light to promote growth. Plants that produce fruits or flowers will show improvement with up to 16 hours a day of supplemental light.

Fluorescent Plant Grow Lights

Until recently, fluorescent grow lights have had a low output and have been too big and bulky to be of much use as a grow light for anything more than starting seedlings. Compact and T5 full spectrum fluorescent lights have changed that. At 75 to 90 lumens per watt, these lights are energy efficient and extremely effective especially when used in numbers. Fluorescent grow lights also have better color rendering properties (more of the light emitted is used by the plant) and produce much less heat than incandescent and HID grow lights. This allows them to be placed closer to plants (within a few inches) greatly decreasing lumen loss from the bulb to the plant. View compact and T5 fluorescent grow lights

The standard 40 and 20 watt full spectrum tubes are great for starts and seedlings. They are also popular for growing low-light plants like herbs and African violets. These lights are low intensity and need to be placed within 6" (up to 12" for shade loving plants) of the plants to be effective. They are a poor light source for flowering and budding primarily because of their low lumen output. View fluorescent grow lights

Incandescent Plant Grow Lights

These lights are good for providing supplemental light to individual house plants or small groups of plants and provide an inexpensive alternative to other grow lights, because they do not require a ballast. Incandescent lights have a low lumen output per watt compared to HID and fluorescent grow lights. View incandescent grow lights


The Cost to Run a Lighting System
To get the operating cost per hour for a light, take the lights combined wattage, and divide it by 1000 to get the kilowatts used. Then multiply that number by the amount your electric company charges per kilowatt hour. HID lights will use the number of watts it emits per hour, ie; 600w system will use 600 watts per hour (regardless of spectrum).
(light wattage output / 1000) x electricity cost per kilowatt hour = Operating cost per hour
operating cost per hour x hours used per month = Operating cost per month





How the Sunlight Effects Plant Growth




200 - 280 nm UVC ultraviolet range which is extremely harmful to plants because it is highly toxic.
280 - 315 nm Includes harmful UVB ultraviolet light which causes plants colors to fade.
315 - 380 nm Range of UVA ultraviolet light which is neither harmful nor beneficial to plant growth.
380 - 400 nm Start of visible light spectrum. Process of chlorophyll absorption begins. UV protected plastics ideally block out any light below this range.
400 - 520 nm This range includes violet, blue, and green bands. Peak absorption by chlorophyll occurs, and a strong influence on photosynthesis. (promotes vegetative growth)
520 - 610 nm This range includes the green, yellow, and orange bands and has less absorption by pigments.
610 - 720 nm This is the red band. Large amount of absorption by chlorophyll occurs, and most significant influence on photosynthesis. (promotes flowering and budding)
720 - 1000 nm There is little absorption by chlorophyll here. Flowering and germination is influenced. At the high end of the band is infrared, which is heat.
1000+ nm Totally infrared range. All energy absorbed at this point is converted to heat.

Grow Light Systems Section






Greenhouses | Greenhouse Accessories | Resource Center
Ordering and Shipping Information

ACF Greenhouses
380 Greenhouse Drive
Buffalo Junction, VA 24529
888-888-9050 - Toll Free
434-374-2055 - Fax


Copyright 1998-2006 Aarons Creek Farms, Inc. All Rights Reserved.

Answer 7

sunlight :):):)