When they replace the bushings do they have to take the subframe and all of that off?? 2003 Chevy Impala?
2006-10-04 14:35:51 · 6 answers · asked by K.M. 1 in Cars & Transportation ➔ Maintenance & Repairs
Can u see the subframe when replacing bushings?
2006-10-04 14:48:09 · update #1
The bushings themselves are relatively inexpensive, but replacing them will cost a little. The control arm may have to be removed from the car. Why does a 2003 Impala already have a worn out bushing? Those things usually last quite a while. Good idea to have the alignment checked if they aren't going to do that already.
2006-10-04 14:41:51 · answer #1 · answered by Nc Jay 5 · 0⤊ 0⤋
Control Arm Bushing Cost
2016-10-14 02:38:59 · answer #2 · answered by Anonymous · 0⤊ 0⤋
From my memory of Fords - those parts were cheap - no more than $20. You will need an alignment when the job's done so the total cost shouldn't exceed $200 depending on where you're from.
Some Impalas have seen service as taxi or police vehicles where a lot of wear and tear has been exerted on the car.
2006-10-04 14:42:51 · answer #3 · answered by Anonymous · 0⤊ 0⤋
NO, just need to take the wheel off and take the suspension apart. But you may need a front end alignment when it's all said and done. The bushings will cost around 50 bucks and labor could be as much as 300. Good luck.
2006-10-04 14:38:16 · answer #4 · answered by jeff s 5 · 0⤊ 0⤋
replace the whole control arm waste of time replacing the bushings and it would cost about the same in labor but less time
2016-03-17 04:01:48 · answer #5 · answered by Anonymous · 0⤊ 0⤋
looked at all your questions concerning the front end on your impala, sounds like you are getting the run-around, either they are screwing with you or they don't know what they are doing, find a trustworthy competent mechanic, avoid the dealership
http://www.2carpros.com/makes/chevy/impala.htm
why not ask these guys, good luck
2006-10-04 14:54:49 · answer #6 · answered by Anonymous · 0⤊ 0⤋