I have all loose except the a part the is keeping the heater core cover from dropping down. It has two hoses on each side going to the vents in the dash, and two hoses that seem to direct heat to the reat are. This is also where the heat comes on when directed to floor in front. Cannot see how it is connected at back. bolts? clips? that is the only thing hanging me up from completing the job. Any advise or maybe a page with an exploded view of what im dealing with here would be appreciated.. Ive done these before, but its been awhile. Dont want to unhook the hoses, in case I have to drive it across town to shop to have job finished. Plastic nipple is cracked somewhere. Thanks
2006-10-04 14:35:37 · 2 answers · asked by mombo323 2 in Cars & Transportation ➔ Maintenance & Repairs
The heater Core itself is not rdy to come out, Im still trying to get the plastic cover off the covers it. Once I get that off, then I can disconnect the hoses and pull it right out. Just having trouble getting main plastic cover off the is covering the core.
2006-10-04 14:44:48 · update #1
3 heater hoses under car back by the steering unit. You will need to take those hose clamps off and pull the hoses back. Be careful, anti-freeze will come out...might land in your eye. Anyway, once that's done, there are 2 clips inside the car that need to be snapped off...sounds like you've gotten that far. So just the hoses. Good luck. Don't get frustrated.
2006-10-04 14:40:43 · answer #1 · answered by jeff s 5 · 0⤊ 0⤋
good luck,my 94 cavalier took only about 6 hours lol,really a pain in the ***,easiest way is taking the glove department out,then easy access from there
2006-10-04 18:50:16 · answer #2 · answered by Anonymous · 0⤊ 0⤋