English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have a gas dry that wont start. The gas is on (i think) and the little ignitor comes on. After 5 minutes of use, its isnt very hot in the basket. What do I do. Does it need more time?

2006-10-04 02:09:08 · 4 answers · asked by monkeyinaplane 2 in Home & Garden Do It Yourself (DIY)

4 answers

Call a repair man. Fooling around with gas is not a good idea.

2006-10-04 02:17:32 · answer #1 · answered by Anonymous · 0 0

maximum whirlpool dryers gas or electric powered have start up windings contained in the motor. It feels like they are sticking open and are not engaged once you're trying to start up it. this would clarify why it often times begins. the start windings are delivered out and in of the circuit by skill of a centrifugal swap positioned contained in the motor on the different end of the pulley the drives the belt. they are reset, at the same time as the motor stops, by skill of a spring. Alot of cases in a dryer lint and dirt will clog up the motor and reason those switched no longer to reset suited. Now in the adventure that your variety does by skill of twist of destiny have a capacitor in it, and it really is undesirable, it regularly gained't start up devoid of giving the motor a spin manually. both way it might probable be only as effortless to only take the dryer aside and look to work out what set-up you've on your variety. wish this helps.

2016-11-26 02:12:46 · answer #2 · answered by Anonymous · 0 0

If the igniter is glowing, then it should light the gas. If the problem is that it does not turn, remove the back panel (About 12 screws) and see if the drive belt is broken. If not, then it could be the motor.
Good luck

Viper19114@Yahoo.Com
In Philadelphia, Pa.

2006-10-04 02:18:26 · answer #3 · answered by viper19114 1 · 0 0

SOME MODELS HAVE A LITTLE PHOTO -CELL WINDOW NEAR THE FLAME... IF THIS IS OBSTRUCTED IT WILL SHUT DOWN THE GAS. IF THAT'S THE CASE, SOME Q-TIPS ATTACHED TO A STICK CAN CLEAN THE GLASS & GET THING GOING AGAIN ( IF THATS THE PROBLEM)

2006-10-04 03:23:15 · answer #4 · answered by Bonno 6 · 0 0

fedest.com, questions and answers