2006-10-04 00:52:18 · 4 answers · asked by madathil98 1 in Cars & Transportation ➔ Motorcycles
I told you how to charge it in your other question. This is how you remove it.
Remove the L & R side covers (pull from the bottom).
Remove the fuse box (not necessary, but makes it easier).
Remove the battery box cover
Remove the battery negative cable.
Remove the battery positive cable from the starter solenoid (leave it attached to the battery).
When installing, with the positive cable attached to the battery, slide the cable through while installing the battery.
Connect that wire to the solenoid first.
2006-10-04 03:15:09 · answer #1 · answered by guardrailjim 7 · 0⤊ 0⤋
not sure where it is on this bike, either under the seat or behind a side panel.
2006-10-04 01:07:42 · answer #2 · answered by Rolfe66 3 · 0⤊ 0⤋
i had that bike an i cant remember where its located ,im thinking its under the seat
2006-10-04 01:11:11 · answer #3 · answered by john doe 5 · 0⤊ 1⤋
un-do the screws take it off, then place the new one where to old one was and put the wires back screwing it back up
2006-10-04 01:00:49 · answer #4 · answered by welshy 2 · 0⤊ 1⤋