2006-10-03 22:38:09 · 6 answers · asked by Malcolm 1 in Cars & Transportation ➔ Maintenance & Repairs
The Audi just uses the normal single filament bulb you can buy from any accessory shop.if you open the tailgate there is a small cap in the plastic trim in the tailgate aperture,behind which is a single screw.Remove the screw,it is about 2 inches long,then hold the lamp cluster and pull it outwards towards the side of the car.It may take a little 'working' & be careful not to chip the edge of the lens against the panelwork.Should take no more than 5mins.Cheers
2006-10-04 08:02:06 · answer #1 · answered by jixer 3 · 0⤊ 0⤋
Most brakes, have similair bulbs and can be picked up at a local auto parts store (Auto Zone, Checker ect..) As for changing the bulb....there should be five or six screws around the cover, just unscrew them, pull the cover off, push in and turn the old bulb at it should pop right out. Do the same in reverse to replace it.
GOOD LUCK
2006-10-04 05:46:00 · answer #2 · answered by lefty_miller 2 · 0⤊ 0⤋
In your owners manual it should give you the procedure for changing a brake bulb as well as the wattage of bulb you need.
2006-10-04 06:21:59 · answer #3 · answered by Sarah G 3 · 0⤊ 0⤋
Its an audi...dude..
go to the authorised service center...
do u want local mechanics messing u r car up???
2006-10-04 05:53:43 · answer #4 · answered by da_great_viper 3 · 0⤊ 0⤋
Go to Halfords, I believe they offer this service and will charge you about a fiver, well my local Halfords does it anyway!
2006-10-04 05:47:10 · answer #5 · answered by Annie M 6 · 0⤊ 0⤋
audi shop
2006-10-04 05:48:23 · answer #6 · answered by Anonymous · 0⤊ 0⤋