repair 2002 raptor rear hub directions on take down?

Answer 1

-Remove the drive chain (take note as to the direction the master link "clip" goes).
-The 2 nuts on the R side of the axle, one has an allen "set bolt" (to keep the nuts from turning).
-Remove the set bolt and remove the 2 nuts.
-Either use a big pipe wrench and/or cresent wrench (adjustable) or a set of special tools (ATV axle nut wrench).
http://www.motionpro.com/
Go to - Tools - Axle
-Use the R brake to keep everything from moving.
-Jack up the rear of the quad or put it on a milk crate.
-Remove the L & R wheels.
-Remove the R wheel hub.
-Remove the brake caliper.
-Slide the brake disc off.
-Slide the axle off (to the left).
-Remove the bolts holding on the bearing housing (one goes through the swing arm and attaches to the caliper stay.
-Tap the bearing housing out (to the left).