ive never done any thing like this before with my pc, but when i've watched being done it didnt look that difficult...
can any one help please???????????????????????????
2006-10-03 04:58:09 · 9 answers · asked by smuggler 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
sorry im not the brightest when it comes to computers, how do i earth my self????
2006-10-03 05:09:09 · update #1
You are right - It's not difficult
* Find a free 5.25" bay
* slide it into place
* connect the IDE cable (flat thin cable with the red stripe indicating pin 1)
* Ensure the if you have another divice on the same IDE check the jumpers are correct (one should be master, the other slave, but it doesn't matter which is which)
* Connect a power cable (the 4 pin thing coming from the power supply)
* Screw in tightly with at least 4 screws
* double check the BIOS setting are correct but you'll probably find everything auto installs from here...
Any problems come back to us ;-)
2006-10-03 05:08:27 · answer #1 · answered by e404pnf 3 · 0⤊ 0⤋
Earthing yourself is easy - just make sure while you are carrying out the procedure you are also touching the side of the case, the desk etc - something that will make sure any static electricity you may have built up won't be discharged into the computer insides. Static electricity discharging is the zap you get from car doors, supermarket trolleys etc.
2006-10-06 05:42:03 · answer #2 · answered by Sue 4 · 0⤊ 0⤋
Unscrew the case
Earth yourself
put the CD/DVD Drive in an empty slot
screw it in
plug any spare ribbon (data) cable in*
plug any spare (internal) power cable in
screw the case back on
*There is technicalities with this about primary/secondary master/slave, but I don't think it matters that much
2006-10-03 05:04:32 · answer #3 · answered by Darrell 4 · 0⤊ 1⤋
Dont deploy any drivers, and placed microsofts activation telephone selection on velocity dial, on each and every occasion alot of significant technique upload-ons commerce you are going to have have been given to reactivate, its no longer extremely useful. seem into linux stay cd's. domicile windows in simple terms isn't that versatile
2016-12-12 19:42:28 · answer #4 · answered by ? 3 · 0⤊ 0⤋
type pc build into you're search engine. There are loads of sites giving details of how to install anything in you're pc.
2006-10-03 10:06:34 · answer #5 · answered by Gerry M 1 · 0⤊ 0⤋
MAKE SURE YOU ARE GROUNDED!!!! You will mess up your computer if you aren't. You'll see it, where you CD rom is , theres another slot, put it there, screw it in, plug the loose ends in and you are ready!
2006-10-03 05:06:26 · answer #6 · answered by Tracey 4 · 0⤊ 0⤋
follow these steps
http://www.buildeasypc.com/hw/howto/instcdrw.htm
leave system pluged in but not switched on ,touch the metal case this will ground you
2006-10-07 00:29:10 · answer #7 · answered by Anonymous · 0⤊ 0⤋
If it's a new one, it should come with instructions.
But, rather than writing out the instructions, please see the site listed.
2006-10-03 05:06:23 · answer #8 · answered by clievers 4 · 0⤊ 0⤋
well it seems all answers are already here... Good luck...
2006-10-07 01:14:34 · answer #9 · answered by yab_007 3 · 0⤊ 0⤋