The brake lights stay on and it has no fire.
2006-10-03 00:17:34 · 3 answers · asked by Bobby T 1 in Cars & Transportation ➔ Maintenance & Repairs
the brake light switch has a plunger that is depressed by a plastic insert. look at it with a light while u .press the pedal with your hand.if the insert is broken, the lights will stay on. if the ignition is not firing,ck the black/yellow wire at distributor.if it has fire,ck the cap,rotor, coil & igniter
2006-10-03 21:08:46 · answer #1 · answered by lizardhead 3 · 0⤊ 0⤋
Your brake light is controled by a switch under the dash, it is located directly in front of your brake pedal, so when you step on brake this switch is tripped, more than likely needs adjusted,, real simple, and for the no fire I would say the electronic ignition module in the distributer,, about alot of money for a new one,, try a wreckin yard for a used one, will be cheaper in case thats not the problembut also,, you may want to check your gap in the Electronic Module, almost like points in an older car,
2006-10-03 00:40:59 · answer #2 · answered by Anonymous · 0⤊ 0⤋
all the indications tell me that the take carry of is basically wiped out. the astonishing one is on the edge of a try that i take advantage of. engine working at idle, e brake on, enable the take carry of flow with the trans in any kit. if it stalls take carry of is okay, if no longer, very undesirable.
2016-10-18 09:58:44 · answer #3 · answered by Anonymous · 0⤊ 0⤋