how do i change the wire that goes to the starter on a 1998 ford expedition?

Question

starter cable is broken i need to change it

Answer 1

i own a repair shop,,and you can get one of these at any auto parts store,and there easy to change,,first you take it loose at the top where the solenoid is,,then take it off at the starter,,once you have it off put the new one back on the same way the old one came off of it,the new one may be a slight bit longer than the old one is,there usually an inch or two longer,but this wont hurt anything,,actually it will help you out,some of what caused the old one to come in to might be the fact that they are almost too short for the vehicle,good luck i hope this help,s,,if you,ll take your time with this,its an easy job to do.

Answer 2

its easy to do , take it loose from soloenoid switch and starter and put the new one on.