Does anyone have any experience with blown in insulation for walls?

Question

I have a garage that has drywall, but no insulation and I want to convert it? How durable and expensive is it? Anybody have any tales to tell?

Is it better than ripping the walls down and redoing it all?

Answer 1

I had this done to my house around 8 years ago,it was pretty reasonable in price, and an excellent thing to do to my house. The company I used did an excellent job. This company blew in the insulation so tight ,that it blew out some dry wall nails in every room. How they do it is they punch a hole in the stucco in-cert a tape measure through the hole ,and measure down,or up to find the fire block,and then make another hole to blow in the rest of the insulation.I THINK IT'S GREAT!!!

Answer 2

definite, you may by no skill have too a lot insulation no be counted in case you reside in a warm or a chilly climate; insulation facilitates you to guard an interior temperature diverse from the exterior temperature on the backside value. interior the chilly room, you additionally should intently look at around the homestead windows for cracks. it is stunning how a lot heat air can get away contained in the direction of the smallest crack. the answer? A $2.00 caulking gun and a $4.00 tube of solid caulking. If the room remains too cool for toddler, your value effective answer is in all probability a thermostatically controlled electric baseboard heater. purchase one a minimum of 30 - 36" long, 1500 watts, a hundred and ten volts. then you definately can keep the entire homestead cooler on an analogous time as holding toddler's room at a greater suited temp. detect the baseboard heater alongside the wall under the window.

Answer 3

You'd be better off removing the dry wall and installing batts. Get the higherst rating batts to provide good insulation summer and winter. With blow in insulation you would still need to make holes between studs for access to each cavity. That would mean repairing the access holes afterwards, then painting. The batts are easier to keep in place between wall studs, push them into place and they'll stay there while you re line the wall.

Answer 4

There are companies that will inject foam, usually on old houses. They drill a small hole in the siding, inject the foam, and put a plug in the hole. It's real ugly on the outside of a house, but it works for that purpose. It would be easier than ripping off all the sheetrock. You'll need a hole between every stud, but in a garage, it might not be bad.

Answer 5

you can cut in a small hole at the top of the wall then use a blower with insulation and fill up the cavity. then patch and paint the hole....have fun it's easy

Answer 6

think about it..if you put blow in in a while it will settle and you will have empty pockets at the top..the company that does this will lie to you..watch out

Answer 7

i disagree, blown in foam now is quite good and works very well