Building a fence: ideas on estimating cost?

Question

Will need to replace the fence around my (small) property -- approximately 140 linear feet. Want a 6' tall redwood fence with 12" lattice top. Can anyone suggest a ballpark cost or a link or two for info?

Thanks!

Answer 1

If you hire a contractor he may charge you between $50 - $80 to dig the hole for each pole. Then they charge you according to how many poles you'll install, because that is the tougher part. Nailing the panels is easy.

If you live in an area where the soil is not glacial, meaning, you don't have a trillion rocks, you could rent an auger at Home Depot and dig the holes yourself.

For the best estimate, go online to Lowe's or so, and see the prices of the panels they have. What you describe may be close to $70/panel, or more. For each panel, add a pole. Don't forget to add one more panel if you want to make a door, and an extra pole. Often those panels are about 8' long.

So you figure, ballpark, you'll need about 18 panels, 19 poles, hardware (about $25 a box of screws), if you are going to fix the poles about 1 bag of cement for each... Should come close to $3000 if you pick the high end panels. A cheaper panel will run well under $30, bringing down the cost considerably

Answer 2

1

Answer 3

If you have employed in the previous landscape gardeners for projects that ended up costing you tens of 1000's of dollars then that other substitute is to make it simply from right here https://tr.im/ja2ft Your way since , in the end and without this knowledge, projects always price far more and took longer than anticipated.
Ideas4Landscaping is a complete multimedia resource database of above 7000 higher-resolution pictures and 300 systematic guides, themes and video tutorials for men and women seeking for landscape concepts and inspiration about their own home.
If you are a landscape gardening enthusiast of any kind, you must by Ideas4Landscaping, a package with a lot of fabulous materials to stimulate project tips.

Answer 4

The parts needed are term posts which go at each corner and at the end of every run of fencing. Line posts which go between the term posts approximately every 10'. Tension bars which are one for every end term post and two for every corner. Tension bands 3 per tension bar for 4' high. Rail end bands and rail end cups one per every run of fencing. Line post caps and term post caps. Top rail normally in 10' lengths. Wire ties to hold the fencing to the top rails and posts. Double drive gate with hardware to mount to term posts. Any of the previously mentioned stores will have installation instructions available for free. A couple of them also have a machine called a design it center with a touch screen that lets you lay out your fence with all the lengths you can put in and will figure out all the pieces for you. It's free to use and the material list is also free.

For the best answers, search on this site https://smarturl.im/aDAnK

Answer 5

I know the perfect solution if you are just starting with woodworking and also if you have already experience with it. I reccomend to give a look to this website ( woodworkingplans.kyma.info ) You can find a lot of woodworking plans and you will be able to manage the projects with a CAD/DWG software. It allows you to modify the projects and to alter the arragements. If you are a beginner this is the easiest way to start, it's the best approach to woodworking; and if you already have experience you will find a lot of ideas and inspirations to improve your abilities with woodwork. I'm sure that you will love it!

Answer 6

I built one not too long ago about the same size but without the lattice and the redwood. Maybe 600-800$.

Answer 7

pick up the phone and call your local home improvement center.