I'm trying to figure out if the tool I bought is the right one, before I drive out to the middle of nowhere to work on the brakes.
2006-10-02 07:18:20 · 2 answers · asked by The Bible (gives Hope) 6 in Cars & Transportation ➔ Maintenance & Repairs
This is the tool I bought. It fits GM 1-12"
http://www.drivewerks.com/catalog/shopcart/TOOL/POR_TOOL_CAT265_pg18.htm
2006-10-02 07:23:32 · update #1
you didn't specify a year or exactly what it is you are trying to do ... this is the brake system specs. for a 2000 Saturn SL2 .. i hope this helps.
2000 Saturn SL2/SC2/SW2
--------------------------------------------------------------------------------
Brake Component Specifications
Application
Specification
Metric
English
Brake Drums
Runout
0.15 mm
0.006 in
Inside Diameter
200.0 mm
7.87 in
Maximum Refinish Diameter
200.6 mm
7.90 in
Discard Diameter*
201.4 mm
7.93 in
Brake Rotors
Lateral Runout
0.060 mm
0.0024 in
Thickness Variation
0.013 mm
0.0005 in
Diameter
250.5 mm
9.86 in
New Thickness (Nominal)
18.0 mm
0.710 in
Minimum Thickness After Refinish
16.1 mm
0.633 in
Discard Thickness*
15.8 mm
0.625 in
Brake Linings
Front Disc Pads
New Thickness
11.0 mm
0.43 in
Discard Thickness
2.0 mm
0.08 in
Rear Drum Shoes
New Thickness
4.0 mm
0.16 in
Discard Thickness
1.0 mm
0.04 in
Hub and Bearing Assemblies
Front
End Play
0.020 mm
0.001 in
Lateral Runout
0.040 mm
0.0016 in
Rear
End Play
0.130 mm
0.005 in
Lateral Runout
0.050 mm
0.002 in
Radial Runout
0.130 mm
0.005 in
Master Cylinder Bore Diameter
22.2 mm
0.87 in
Caliper Bore Diameter
51.0 mm
2.01 in
Wheel Cylinder Bore Diameter
19.0 mm
0.75 in
Minimum Vacuum at Power Booster
--
15 in Hg
Brake System Fluid Capacity
0.5 liters
17.0 oz
*Brake drums and rotors have a discard diameter or thickness dimension cast into them. This is a wear dimension and not a refinish dimension. Any drum or rotor which does not meet the specification values should be discarded.
2006-10-02 16:49:09 · answer #1 · answered by knowsitall1 2 · 0⤊ 0⤋
as a rule in basic terms one enormous one. even regardless of the undeniable fact that, bike makers began the fad of arising the calipers with 2, the 4, then much greater calipers in step with rotor(disc) as motorcycles have been given greater useful and suspension techknowlogies stepped forward. motor vehicle makers have accompanied healthful with a number of their automobiles, whether completely on shipment automobiles, heavy duty automobiles, and intense-end overall performance autos with front and rear rotor(disc) brakes.
2016-12-26 07:33:28 · answer #2 · answered by langhorne 3 · 0⤊ 0⤋