Is there any other componet i will need from the pig to the range?
2006-10-01 21:40:58 · 3 answers · asked by doug e 1 in Home & Garden ➔ Do It Yourself (DIY)
I hooked it up with a gas wall heater and the range to gether using the propane companys regulator .The gas heater worked fine but the range had a yellow flame and i did convert the stove orfice to propane.I have tried two diffrent # regulators and the stove still burns yellow, i dont know what to do next? I am using this in a deer camp! please help!
2006-10-01 21:48:08 · update #1
Lines and regulators need to be sized according to the total Btu load as well as the number of feet of piping in the system. After installation the system needs to be pressure and flow tested using a water manometer to determine the integrity of the piping as to determine the proper performance of the regulators under load. If you have a propane supplier, at least call them and get some advice.
2006-10-02 15:26:41 · answer #1 · answered by lpgnh3 4 · 1⤊ 0⤋
I am not an expert, but suggest adjusting the amount of air to gas, at the Burner - lift up the top of the Range, look for the tube that leads to the Burner, should be a slide to open and close the air intake. Hope it helps, and good hunting-
2006-10-01 23:42:04 · answer #2 · answered by Anonymous · 0⤊ 0⤋
get someone with a licence so you don't blow up
2006-10-02 08:52:30 · answer #3 · answered by cameron b 4 · 0⤊ 0⤋