I have a 1998 seadoo SPX which recenty stopped running. I put in new plugs and gas and battery. no spark I have even grabbeb the bare wire while cranking and no. metering the primary of the two wire coil = .6 ohms seconary of the coil=17k ohms , 25 k ohms
with end caps on all fuses and connections test good . 12 volts to the mpem. meter on the mag trigger 286 ohms the mpem is very expensive i wish to test before replaceing thank you . Lee
2006-10-01 18:05:44 · 3 answers · asked by alarmman 1 in Cars & Transportation ➔ Boats & Boating
It can be bench tested if you have the right test equipment
See your seadoo dealer, that is where you will have to go for the parts anyhow!
2006-10-02 02:27:07 · answer #1 · answered by Anarchy99 7 · 0⤊ 0⤋
sounds silly but i would ck the Lanyard just to be sure
2006-10-05 01:21:12 · answer #2 · answered by Michael M 2 · 0⤊ 0⤋
it should tell you in the repair manual :)
2006-10-01 18:38:26 · answer #3 · answered by Anonymous · 0⤊ 0⤋