English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

when im doing the dishes and when i go to rinse with hot water the water starts off cool then warm then gradually to hot, then it vibrates the hell out of the pipes almost shaking up the house. This just started happening recently.

2006-10-01 17:24:53 · 13 answers · asked by Daler Y 1 in Home & Garden Maintenance & Repairs

13 answers

There may be air in the line - Turn water off, open all faucets, sinks & tub...then turn faucets off. Turn water back on and slowly turn all faucets back on and let run until they dont "spit" any more. If the tank is old or if water supply has alot of minerals in it, the bottom of the tank may be full of settlement and you'll probably have to replace the tank. Good Luck :)

2006-10-01 17:34:34 · answer #1 · answered by pegpal22 2 · 3 0

Crazy Water Pipes

2016-12-13 05:55:11 · answer #2 · answered by ? 4 · 0 0

Air in the lines. Do you ever check to see if the hot water heater is full of water?
Not seeing, being there that's my first guess.
There is a release value on top of your hot water heater. If it is not completely filling up, it may have a lot of air in it. The over flow pipe/pan will catch the water if the problem is not water. I hold it till the water comes out, that way you know it is not the case of air if water flows out right away. If it is this, will rid the heater/lines of the air.
Also you need to completely drain your hot-water heater at least every year. The chemical build-up will damage your heater if not done.

2006-10-01 17:42:16 · answer #3 · answered by pdbpb 2 · 1 0

Over the years water deposits will collect inside the lines. This is more pronounced in the hot lines than cold although both do form calcium and iron decosits. due to the 45 and 90 degree turns in the plumb lines, and due to these deposits... as water travels around the corners and starts to flow it creats water turbulance inside the line... it is this turbulance and the fact that the lines are left during construction loose in order to avoid breakage that has come together most recently to cause your problem. A plumber can remove your main line inlet and place a compound into the lines that will disolve the deposits and stop this problem. if you have a water softener or reserve tank you can buy the product at wal-mart to do it your self.

NOT TO BE ONE WHO CAN NOT ADMITT WHEN I AM WRONG... I MUST TELL YOU... I WAS WRONG. GIVEN THE VOLUME OF DIFFERENT ANSWERS YOU RECIEVED ON THIS ISSYE... I DID THE RESEARCH FOR YOU. TURND OUT THE PROBLEM IS CAUSED BY WATER PRESSURE IN EXCESS OF 100 PSI. WERE YOUR NORMAL PRESSURE IN RESIDENTIAL HOMES SHOULD BE AROUND 70. I HAVE LISTED MY SOURCE CONCERNING THIS AND HOPE THAT THIS HELPS. COPY AND PASTE THIS TO YOUR SEARCH AND YOU MAY READ THE WHOLE ARTICLE. THANKS AND SORRY FOR THE WRONG INFO AT THE START.

2006-10-01 17:36:43 · answer #4 · answered by Anonymous · 0 1

It surely would desire to be the chilly pipe vibrating because of the ball-valve interior the loft opens to re-fill the chilly water storage gadget whilst the nice and cozy faucet is administered. this would create a vibration wave down the chilly pipe . beginning the chilly faucet downstairs reliefs this vibration. you will desire to extra healthful a various form of ball-valve if that became into the case. you will possibly would desire to circulate interior the loft and verify the chilly water storage gadget on the ball-valve whilst this noise became into going on. in specific circumstances putting in a length of plastic pipe like Hep20 can hose down the vibration. even nonetheless it rather is considerable discover out no count if it rather is the chilly or warm pipe it is the source of the vibration in case you prefer to remedy the situation.

2016-10-15 10:25:56 · answer #5 · answered by ? 4 · 0 0

i recently just did all new piping in our house and the problem with the cool to warm to hot is probably the distance it takes to get to the faucet and the vibrating is probably that there not hung right or not tight enough to the hangers run it and go check it out you'll see for yourself

2006-10-01 17:30:19 · answer #6 · answered by Amy 3 · 0 0

Have you had any pluming work done recently? It sounds like an air hammer. Somehow you got air in the lines. It will have to be removed. Contact a plumber for details. You might also have a water leak somewhere. Get it checked.

2006-10-01 17:31:12 · answer #7 · answered by Anonymous · 1 0

hot water heater problems? gas bubbles popping up inside heater and making it to you? Or a tiny alien dancing to rapmusic in your pipes?

2006-10-04 12:54:53 · answer #8 · answered by Anonymous · 0 0

Likely there is a broken pipe bracket somewhere. Get a flashlight and explore.

2006-10-01 17:32:50 · answer #9 · answered by Norton N 5 · 2 0

Could be a bad washer or 0 ring at the faucet.

2006-10-02 15:27:59 · answer #10 · answered by Anonymous · 0 0

fedest.com, questions and answers