I check the out let of my low head light its working and then i check my bulb its working. But when i connect them together it doesnot work. I am not sure what is going wrong?
2006-09-30 16:53:58 · 5 answers · asked by zahir a 1 in Cars & Transportation ➔ Maintenance & Repairs
Either you have a broken switch or there's a short in the wiring. Take it to a mechanic and have them check it out.
2006-09-30 16:57:49 · answer #1 · answered by HULK RULES!! 7 · 0⤊ 0⤋
The usual cause of this condition corrosion. Take a piece of sand paper and brighten up the terminals on the bulb. Then roll a piece of sand paper up and run it in and out of the socket. Then try it again. If this does not work, then try shimming up the terminal or slightly twisting the terminal causing it to mis-shapen. Or try to crimp the socket to tighten it up. If these do not work, replace the socket, still does not work replace the bulb. You may want to try some dielectric grease before you try all the other things though.
But you have said what year car or what make car it is. This may change the answer. A mechanic or parts counter person will always ask for...Make, model and year. Remember to include these in your next post. It does make a difference.
2006-10-01 00:12:41 · answer #2 · answered by It All Matters.~☺♥ 6 · 1⤊ 0⤋
The connection is wrong. Ur car needs to see a mechanic..simple.
2006-10-01 00:03:00 · answer #3 · answered by imunderveil 2 · 0⤊ 0⤋
bulb is good lights pwr is good .yea a short .means somewhere tween bulb and connection positive and neg. are ... or the bulb is DUD.
2006-10-01 00:04:57 · answer #4 · answered by martinmm 7 · 0⤊ 0⤋
you probally just got corroided wires or the plug on your light is, has to be one or the other.
2006-10-01 00:05:53 · answer #5 · answered by wizard 2 · 0⤊ 0⤋