English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

we do not know how to remove the inside panel

2006-09-30 04:23:27 · 2 answers · asked by bjsuno 4 in Cars & Transportation Maintenance & Repairs

2 answers

look for any screws holdong the armrest in place
unsrew the door lock button
go along the edges of the door panel starting near the bottom and pull it out a little
you will see a series of plastic panel clips
just pop they will pop out of their holes as you gently pull the panel away from the door
after you get the panel loose lift gently up on it to get it off the lip at the top next to the window
reach behind and disconnect the wires to the power window switch
you will have to sort of feed it off the interior door handle (may be a screw there to take off....might have a plastic plug hiding the screw)
once the panel is off and you remove the plastic moisture barrier you will see the door handle from the inside
the rest is a cake job
you may want to take a door panel clip to the parts store and get some replacements (cheap) so that they dont keep coming loose after you put the panel back on

2006-09-30 04:42:34 · answer #1 · answered by John K 5 · 2 0

i own a repair shop,,and there is clips that hold the door panel on the are around the edge of the door panel on it,,use a small screw driver to pop them out,and then remove any remaining screws that hold it on,and the you see 2 bolts that hold the door handle on,,if you remove these it will come right off be care full when doing it and you wont scratch the paint on it,,there easy to do,,there may be a piece of plastic on the inside you might have to remove some of it to get to the 2 bolts that hold the door handle on,,and ,make sure the glass is always up on it so you can get to it,,good luck i hope this help,s

2006-09-30 11:40:07 · answer #2 · answered by dodge man 7 · 0 0

fedest.com, questions and answers