Used Card and spray purchased at store. Got out all bubbles. Half of the windows tinted stayed put, the other half was off in 30 minutes. Can't feel adhesive on either side, so went by shiney vs dull. I am very disappointed. The tint that is still up looks great. HELP!
2006-09-29 13:08:21 · 5 answers · asked by lola girl 2 in Home & Garden ➔ Do It Yourself (DIY)
I think my only suggestion might be,,, did you apply moisture, and work the film in direct Sunlight hitting the area in question?
Rev. Steven
2006-09-29 13:12:50 · answer #1 · answered by DIY Doc 7 · 0⤊ 0⤋
I just completed the DIY home window tinting also. Mine are all on good and look great.
Did you make sure your window was spotlessly clean before applying the window film.
Did you follow the instructions step by step.
Apply the film when there is no sun shining on the window.
Make sure there is plenty of liquid on the window and on the film.
The sticky side of the film goes on the window.
2006-09-29 13:16:17 · answer #2 · answered by Bluealt 7 · 0⤊ 0⤋
You need to wet both tint and glass.When you seperate the film the shiny side goes outside dull against glass
2006-09-29 13:25:43 · answer #3 · answered by Dave 3 · 0⤊ 0⤋
You have to really clean the windows prior to putting on the film.. I donot like film because it is too difficult to apply
2006-09-29 13:56:49 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Did you make sure the surface was oil-free , before you put the tint on?
2006-09-29 13:35:15 · answer #5 · answered by Billy 1 · 0⤊ 0⤋