Absolutely they even make a mix that is part synthetic part conventional
2006-09-29 01:08:21
·
answer #1
·
answered by delmonticoman 5
·
0⤊
0⤋
Well, you can, but unless you are a petrocehmical engine you should probably leave it to someone who is.
They sell blends, formulated by petrochemical engineers, but mixing any oils yourself you risk creating shear points in the lubricative plane where the two types of oil do not mix and may allow a separation of the protective layer on the metal. While this might only produce failures in rare cases, it is nevertheless a consideration even in mixing unlike kinds of regular oil or synthetic oil.
2006-09-29 01:30:02
·
answer #2
·
answered by anonymourati 5
·
2⤊
0⤋
you could truthfully mixture both sorts. see you later as you're employing the counseled oil grade you need to be nice. man made is extra ideal for a usual driver like you, and usually this holds real. man made motor oils are extra ideal at placed on relief, cooling, sealing, or perhaps cleansing your engine. ordinary motor oils are sturdy yet they are not at immune to warmth and do not flow as sturdy or extra ideal than synthetics - it really is why it really is maximum more cost-effective to purchase ordinary oil. How lengthy between oil ameliorations? i'd propose getting into accordance on your proprietor's guide first. As you get used to synthetics, you could try the oils that grant prolonged drain periods consisting of Amsoil and Mobile1; both grant prolonged drain oils that ought to very last more than what your proprietors guide exhibits. also, remember about getting a corresponding oil clear out. It, too, must be a intense-end product. once you come back to imagine of it, some extra extra funds compared to the price of a clean engine/motor vehicle or expensive restore, synthetics are nicely actually worth the money. sturdy success!
2016-11-25 02:11:04
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
You can, but you should not. If your engine is under warranty, and the engine gets damaged, the first thing the manufacturer does is to check the amount of and quality of oil in the crankcase. If the oil does not meet requirements, the mfgr. will not pay for repairs.
2006-09-29 01:15:47
·
answer #4
·
answered by regerugged 7
·
0⤊
0⤋
Absolutely...... I recommend it if you only want a syn blend..... why? most pre-mixed blends are not 50/50, more like only 20 percent syn give or take...
2006-09-29 16:34:41
·
answer #5
·
answered by 572ci. 5
·
0⤊
0⤋
no it will mess up the engine
2006-09-29 01:08:33
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
Yes, but why would you?
2006-09-29 01:47:05
·
answer #7
·
answered by Trump 2020 7
·
0⤊
0⤋