all 4 spark plugs work but cant get it to start it allso back fireing when u try to turn it over
2006-09-27 02:30:15 · 6 answers · asked by kenny78t 1 in Cars & Transportation ➔ Motorcycles
I would clean the carbs. 1&4 plugs use the same coil and 2&3 use the other coil. So that rules out electrical problems. The back firing is caused by the black spark plugs. The spark plugs are getting fouled because of the carbs.
2006-09-27 03:17:29 · answer #1 · answered by guardrailjim 7 · 0⤊ 0⤋
Firstly you have the timeing out if it is back firing swop the plug lead diagonaly across the distributor cap. if you have black spark plugs this could be caused with the head gasket gon between the pistons or the piston rings have stuck on the pistons (this could free its self when it runs) hopr this helps.
2006-09-27 10:45:31 · answer #2 · answered by I am always right 1 · 0⤊ 0⤋
Sugest a week spark. could be the coil. swap the coils with one another and se if it swaps the problem to 2-3/ this will give an answer before laying out cash before you have to.
If it is the coil m&p do one for about 25 pound.
2006-09-27 16:37:00 · answer #3 · answered by The Count 2 · 1⤊ 0⤋
jetting is different on inside cylinders as they run hotter. ride harder to keep plugs clean. this is a sport tourer not a cruiser.
Kawasaki make a fuel additive called carbo clean to remove carbon from valves, pistons and cylinders of bikes that dont get ridden hard enough to stop fouling ( I think Yamaha and Honda make something similar but I havnt used them so dont know)
2006-09-28 05:00:59 · answer #4 · answered by 1crazypj 5 · 0⤊ 0⤋
carbs out of ballance for the soot on plugs. backfire, make sure you have the ht leads on the right plugs.
2006-09-27 09:33:27 · answer #5 · answered by Rolfe66 3 · 0⤊ 0⤋
Could be valves leaking.
2006-09-27 09:41:06 · answer #6 · answered by Tallboy 4 · 0⤊ 0⤋