2006-09-26 16:15:52 · 8 answers · asked by D B 1 in Cars & Transportation ➔ Maintenance & Repairs
Some Soft Scrub, Comet, or Bar Keep's Friend wetted down with water, and some elbow grease will remove most of the oxidation. The grit supplied in bathroom cleaner usually does a decent job. Rinse well after scrubbing and apply a good automotive polish to smoooth out the imperfections. If you want them like new again, you will have to have them replaced.
2006-09-26 16:39:45 · answer #1 · answered by yugie29 6 · 0⤊ 0⤋
I removed this on my wife's Chrysler Van's headlight. The brand Mothers has a item called the Power Ball that attaches to your drill. I think it was about 20.00 and it took less than 2 minutes to do each headlight. It also works great on rims to clean them up nice and its fast.
2006-09-26 23:26:07 · answer #2 · answered by Dan D 2 · 0⤊ 0⤋
some kind of a polish. I heard of a special device doing this. they put some solution on the headlight and polish it
2006-09-26 23:20:04 · answer #3 · answered by zxcpoi 4 · 0⤊ 0⤋
brake fluid does the trick. You can also use rubbing compound to finish with. Also if you can take out the lights and wash out the inside it will help
2006-09-26 23:24:32 · answer #4 · answered by osito 3 · 0⤊ 0⤋
try putting a little car wax on it and it will shine right up
2006-09-26 23:54:13 · answer #5 · answered by A M 2 · 0⤊ 0⤋
wash them,
gas and clean lint free rag,
2006-09-27 03:25:41 · answer #6 · answered by tim s 3 · 0⤊ 0⤋
plasticX from meguirs usually works well. or any plastic restoration kit.
2006-09-26 23:49:27 · answer #7 · answered by mommy2savannah51405 6 · 0⤊ 0⤋
Any good glass cleaner.
2006-09-26 23:19:06 · answer #8 · answered by Anonymous · 0⤊ 0⤋