take it to a mechanic and have a new radiator installed
2006-09-26 08:05:27
·
answer #1
·
answered by jack_daniels 5
·
0⤊
0⤋
How big of a leak, and from where? Stop leak will help for a small pinhole in your radiator. If you have a leaky hose, make sure the clamps are tight, or if there is a hole in it replace it. If it's anything beyond a bad hose or a small pin hole, take it in.
2006-09-26 08:16:21
·
answer #2
·
answered by oklatom 7
·
0⤊
0⤋
I'm sorry but it's a ford. I used to have the predecessor (Tempo) and they are the same, and I had the exact problems. Next problem was the transmission.
My advice:
don't put too much money into it. Start saving for another, even if it is for example, a 1991 toyota or something, it's still better than your later model ford.
No wonder the company itself is laying off like crazy. They haven't seen anything yet.
Good luck
2006-09-26 08:20:32
·
answer #3
·
answered by Visanza 1
·
0⤊
0⤋
If you are sure it is the radiator just get it fixed. A welding shop near hear fixes them for what it costs to buy stop leak. He even does the aluminum ones. Call around and find someone to fix it.
2006-09-26 08:12:03
·
answer #4
·
answered by Thomas S 6
·
0⤊
0⤋
OPEN your hood and look for where the leak is coming from. Then you can decide if it's something your comfortable repairing or if you need to take it to a shop. At least this way, you'll know if what the shop tells you is the truth or if they are trying to pull one over on you.
2006-09-26 08:36:39
·
answer #5
·
answered by Jeffrey S 6
·
0⤊
0⤋
Find out where it is leaking from. Is it from a hose or the radiator? Could it be from the thermostat? Find where it is leaking from then ask what you should do.
2006-09-26 08:12:22
·
answer #6
·
answered by Joey R 5
·
0⤊
0⤋
The heater middle is leaking and needs to get replaced. regrettably, this may well be much less complicated pronounced than performed. especially situations it style of sounds like they took a heater middle and equipped a vehicle around it. till you're routinely prone, you may convey it to a fix save and characteristic it replaced.
2016-10-18 00:35:53
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
theres special weld glue kinda stuff that can be put on it or just replace it all together
2006-09-26 08:12:44
·
answer #8
·
answered by supraknuckles 2
·
0⤊
1⤋