Couldsomeone please tell me exactly how to change the strings for an electric guitar with a floyd rose bridge?

Question

The bridge a Kramer licenced original floyd rose.

Answer 1

Stringing a guitar (Floyd Rose Tremolo)

1. Loosen the top nut
2. Loosen the strings with the tuning machines.
3. Loosen string lock bolts at the end of the bridge approximately 3 turns.
4. Remove the old string.
6. Place the new string through the tuning peg and locking nut.
6. Cut the string and leave about 1 - 2 inches to work with.
7. Insert the string into the bridge saddle and tighten until snug but do not overtighten.
8. Repeat steps 4-7 for each string.
9. Adjust fine tuning knobs to the middle position.
10. Stretch strings and tune to pitch using the tuning machines on the headstock.
11. Tighten the locking topnut.
12. Stretch strings again
13. Use fine tuning knobs to tune to pitch.

Answer 2

you need to use any strings u r pleased with. test with differnt manufacturers. I play classic rock and characteristic settled on Dean Markley Nickel 9.11.15, 26.36,40 six. skinny suited heavy backside works solid for rock. yet besides the fact that strings you utilize a Floyd Rose is usually a discomfort to song. undergo in concepts in case you adjust the gauge of ur strings u will would desire to alter the spring rigidity of the bridge springs so as that the bridge nonetheless floats point KK

Answer 3

call local guitar center or music store and ask them.