the file NTLDR is missing now i can't open my computer i wanted to konw how to put that file back so i cango back on my computer. It is very painful with out it these days
2006-09-26 04:30:33 · 9 answers · asked by regis_ely2000 2 in Computers & Internet ➔ Hardware ➔ Desktops
Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM. First verify that no floppy diskette is in the computer, unless you are attempting to boot from a diskette.
For further info go here:
2006-09-26 04:34:38 · answer #1 · answered by Barkley Hound 7 · 0⤊ 0⤋
Use the Recovery Console to fix any NTLDR problems.
Using the Recovery Console, copy the Ntldr file from the Windows XP CD-ROM to the root directory of the current active partition. Follow these steps:
1. Start your computer by using the Windows XP Setup floppy disks or by using the Windows XP CD-ROM.
2. At the "Welcome to Setup" screen, press F10, or press R to repair.
3. Press C to start the Recovery Console.
4. Copy the Ntldr file from the Windows XP CD-ROM to the root of your system partition by using the following commands, pressing ENTER after each command:
1. Type cd .. to go to the root of drive C. (Note the space)
2. Type the letter of the CD-ROM drive
3. Type cd i386 to change into the right directory
4. Type Copy ntldr c:
5. Type Exit
If the partition was not formatted by using Windows, you might also need to run the Recovery Console fixboot command to make the active partition bootable.
After you can boot into Windows, it is recommended that you use the Windows Disk Management snap-in tool to reset the original system partition as the active partition, and then restart the computer.
2006-09-26 05:19:50 · answer #2 · answered by midnightlydy 6 · 0⤊ 0⤋
If you have your OS disk, pop that in and try to run a repair.
Windows XP users
-------------------------
Insert the Windows XP bootable CD into the computer.
When prompted to press any key to boot from the CD, press any key.
Once in the Windows XP setup menu press the "R" key to repair Windows.
Log into your Windows installation by pressing the "1" key and pressing enter.
You will then be prompted for your administrator password, enter that password.
Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter "E". This letter may be different on your computer.
copy e:\i386\ntldr c:\
copy e:\i386\ntdetect.com c:\
Once both of these files have been successfully copied, remove the CD from the computer and reboot.
Another possible problem:
Corrupt boot sector / master boot record.
-----------------------------------------------------
It's possible your computer's hard disk drive may have a corrupt boot sector and/or master boot record. These can be repaired through the Microsoft Windows Recovery console by running the fixboot and fixmbr commands.
Additional information and help in getting into the Microsoft Windows Recovery console can be found on document CH000627.
-------------------------
There are other solutions on the following link if you are not using WinXP. Good luck.
2006-09-26 05:03:51 · answer #3 · answered by ? 5 · 0⤊ 0⤋
NTLDR is Windows NT loader.
This file is aparently important. Either do a system restore to a time when this file was not corrupted, or re-install your Operating System.
2006-09-26 04:38:49 · answer #4 · answered by Anonymous · 0⤊ 0⤋
well, how do you think it was booted out of your system in the first place? har-har. you have a virus. or you stupidly deleted it. great job. anyway, get anti-virus software, remove whatever, and reinstall your OS. In fact, go to the professionals, the techie experts. They'll help you. Yeah, they'll know what to do. So stop asking questions, open your phonebook, and call up tech-support or something. Or wait for a super-techie to answer your question.
2006-09-26 04:37:00 · answer #5 · answered by The 35th of the Order 2 · 0⤊ 0⤋
in case you comprehend the thanks to apply the fix console and performance your OS cd you could reproduction the ntldr from there and paste it lower back on your computing gadget. if no longer you could stick your cd in reboot and do a abode windows restoration. that's alot less complicated than reformatting and swifter. you also wont lose what ever files is on your computing gadget. to do the restoration-stick in cd-reboot-press any key besides from cd (in case you dont get this on the spot you should set your boot config besides to cd-rom 1st, that's executed contained in the bios)-once you press any key the computing gadget will do its project-then you honestly will be requested if you're installation or repairing abode windows-opt for restoration-you'd be requested in case you want to apply the fix console or enable abode windows restoration-opt for enable abode windows restoration-the computing gadget will do its project back then reboot-as quickly because it reboots that is going to both carry you to the go surfing reveal screen reason it fixed the project already or that is going to go via a procedure it truly is quite a lot like installation abode windows for the first time-you'd be brought on for some straightforward information like language date and time and keyboard format-once the computing gadget is executed that is going to reboot and then you need to be reliable to go.reliable success
2016-12-02 02:32:48 · answer #6 · answered by ? 3 · 0⤊ 0⤋
Here you go check this site out for the fix:
http://www.computerhope.com/issues/ch000465.htm
2006-09-26 04:33:31 · answer #7 · answered by Anonymous · 0⤊ 0⤋
Simply re-install your O/S.
2006-09-26 04:47:48 · answer #8 · answered by dey_prakash 2 · 0⤊ 0⤋
Please visit this site and read everything there about your problem missing NTLDR.
http://www.computerhope.com/issues/ch000465.htm
2006-09-26 04:34:18 · answer #9 · answered by Anonymous · 0⤊ 0⤋