2006-09-23 23:40:11 · 4 answers · asked by miracles1996@yahoo.co.uk 1 in Home & Garden ➔ Do It Yourself (DIY)
POWER OFF
Inspect inside oven, is element held with screws from INSIDE cavity? If so remove screws, withdraw ement, pull off connectors (NOTE LOCATION OF WIRES). Fit new element, reverse procedure.
If no screw heads on inside , then.....
Remove oven from housing, usually 2 or 4 screws through trim.
Remove back cover from oven. 8 or 10 screws.
Locate element and pull off wiring. NOTE LOCATIONS
Remove any nuts/washers from studs, withdraw element into oven cavity.
Reverse procedure with new element.
Sorted!!
2006-09-24 00:05:02 · answer #1 · answered by jayktee96 7 · 0⤊ 0⤋
buy the spare part first
dissconect the oven from its mains
dismantle the oven casing to access the faulty part
remove this carfully then replace with the new one
carfully watching and remembering what part goes where
the jobs a good un if necessary
draw a diagram to help you as you remove the parts easy as pie in the oven
2006-09-24 06:57:23 · answer #2 · answered by a1ways_de1_lorri_2004 4 · 0⤊ 0⤋
check manufacturers website for help
2006-09-24 06:56:04 · answer #3 · answered by Anonymous · 0⤊ 0⤋
try this web site
www.howtomendit.com
2006-09-26 09:18:59 · answer #4 · answered by tonymccullochuk 2 · 0⤊ 0⤋