has 60 psi fuel spark on #1 tdc good Compression on all cyl
had no spark no codes when i got it changed pcm got spark back and an ing code changed ing mod now no codes but still no start
changed coil,cap, router,cam sen,
2006-09-23 14:10:07 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
i know this is going to sound crazy,,but i own a repair shop,,and a while back i had a truck that did that,,and it killed all 8 spark plugs from me trying to start it,,they got wet with gas and shorted out on it, i worked for 2 hours trying to get it started ,,and decided to change the plugs and it fired the first time i turned it over,,you might need to change them,,i have seen this happen a few times,and it probably wont be the last time i see it,,good luck,i hope this help,s
2006-09-23 14:22:02 · answer #1 · answered by dodge man 7 · 1⤊ 0⤋
Check your throttle body fuse. I had a similar issue with my 1990 G20 and that turned out to be the problem. Also, if you changed the cap, make sure your firing order is correct. The last time I made this mistake, every wire was off by one position. The time before that, I was looking at the diagram upside down.
2006-09-23 21:16:32 · answer #2 · answered by Joe K 6 · 0⤊ 0⤋
Did yousay you changed the computer
2006-09-23 21:27:07 · answer #3 · answered by onlord2004 2 · 0⤊ 0⤋