okay i have a 98 custom chopper that i just bought with a 1340 evolution in it. the problem is for inspection out here i have to have front lever and foot brake both light up the tailight. the wiring was a homedone job but is still color coordinated, but i looked at the wires coming from the front brake and they seem fine,but instead of lighting up the rear light the merely cut it off. the foot brake works fine, do i have to run some sort of relay or just have the front spliced into the rear wire like it is now and run to the tailight? i need some other little help if theres any experts who wanna chat on messenger? thanks
2006-09-23 11:14:20 · 4 answers · asked by dakrt1 1 in Cars & Transportation ➔ Motorcycles
Gardrail is right. You can share the same switch with the rear brake. Sounds like an easy fix. I wish I new why they are asking this question because it was never put onto older bikes.
2006-09-23 13:18:59 · answer #1 · answered by teddybar67 4 · 0⤊ 0⤋
Splice the front brake wire into the rear brake.
Power to the F brake switch, a connection is made and power is sent to the brake light.
2006-09-23 14:06:37 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Just splice the front brake wire into the rear brake.
Power goes to the F brake switch.
Apply the brake, a connection is made and power is sent to the brake light.
2006-09-23 11:54:25 · answer #3 · answered by guardrailjim 7 · 0⤊ 0⤋
go to a mechanic
2006-09-23 11:24:20 · answer #4 · answered by j-r-c 2 · 0⤊ 0⤋