2006-09-23 10:17:54 · 7 answers · asked by chuck685 1 in Cars & Transportation ➔ Other - Cars & Transportation
Wwell I have found 2 ways that work.
First go to the auto parts store and get some GOOP the hand cleaner.
It does do the job for a while
Next Toothpast. It is a mild adbracsive and it polishes the plastic
Hope this helps in some way
2006-09-23 10:21:52 · answer #1 · answered by goldwing127959 6 · 1⤊ 0⤋
Most of the time it's the plastic discoloring as it ages, not a film on the outside. When that happens, it's pretty much shot and needs to be replaced
2006-09-23 10:27:22 · answer #2 · answered by Bostonian In MO 7 · 0⤊ 0⤋
universal sandpaper may well be slightly too tough, try water and an abrasive cleanser including tender Scrub or Comet, or Bar retains pal. Like bathing room tile cleanser. it is going to supply adequate grit to sparkling the lense yet not scuff it up too undesirable. it is going to take some elbow grease, and save it moist whilst working the cleanser into the clouded lense. Rinse nicely and sparkling with a tender rag, it will make a super distinction on your visibility.
2016-12-15 13:05:05 · answer #3 · answered by younker 3 · 0⤊ 0⤋
I have had very good results from using chrome polish and alot of rubbing and then a good coat of car wax to slow the yellowing process,and smooth and seal the surface . Also toothpaste as suggested same idea. It can be removed !
2006-09-23 10:34:56 · answer #4 · answered by Sputterfud 1 · 0⤊ 0⤋
Never-dull
wetsanding/clearcoating them
or plastic restoration stuff
2006-09-23 10:26:59 · answer #5 · answered by mommy2savannah51405 6 · 0⤊ 0⤋
Sorry it doesn't come off it is the plastic discoloring.
2006-09-23 10:23:44 · answer #6 · answered by Mark G 4 · 0⤊ 0⤋
a angle grinder will work
2006-09-23 10:40:21 · answer #7 · answered by bumble 3 · 0⤊ 0⤋