i bought thses mirrors and dont know how to install them or who would install them car-x says no who might do that in naperville/aurora IL area or is it hard to install myself????? do i need to run a wire from the turn signal to the mirror? one person said to just screw them on but i know that i need to know how to hook up the wires for the blinker.......
2006-09-23 09:48:39 · 3 answers · asked by Big Daddy Cake 1 in Cars & Transportation ➔ Maintenance & Repairs
This site may help you greatly. It has full color pictures and wiring colors for your Mustang showing how to install and where to route the wiring. Hope this helps.
http://www.kwmuth.com/techsupport/pdfs/21000420.pdf#search=%22%222003%22%20Mustang%20directional%20mirrors%20installation%22
2006-09-23 10:04:39 · answer #1 · answered by yugie29 6 · 0⤊ 0⤋
do you have the mach system or not, if so you have to pull the tweeter off and then you will see the i think 4 10mm screws for the mirror. You then have to simply remove and replace the mirror. the wires part the way i did it was , i took the hot wire ran it to the fuse box and tapped into an acc. slot that was switched with ignition. then you take the accessory or signal wire that tells it to blink with turns signals, you run that up onto steering column and splice into the combo switch on the wire that controls turn signal you ll need to look at a wire diagram to be sure which wire that is then all you do is hook up the ground to a clean paint free ground and your done. its easy if you have mild electrical knowledge.
2006-09-23 20:22:36 · answer #2 · answered by Wild horse C 3 · 0⤊ 0⤋
take it to ford.
2006-09-23 17:05:25 · answer #3 · answered by mommy2savannah51405 6 · 0⤊ 0⤋