Either dirty filter or dirty coil face causing lack of propere air flow, or the thing has a leak and is low on a charge.
2006-09-24 13:53:23
·
answer #1
·
answered by jollygreen60 3
·
0⤊
0⤋
Lack of air flow. Take that thing out of the window, take all the covers off, and hose the $*** out of it! Let it dry completely and put it back in the window.
There will be a filter on the indoor side of the unit. CLEAN IT!
2006-09-23 05:59:53
·
answer #2
·
answered by fireandice707 2
·
0⤊
0⤋
It is probably an air flow problem coupled with cooler indoor temp. causing problem. Many of the newer A/C are made in China and not too much engineering is going into the speed of fan to the actual need of speed of fan during lower temp. settings. If you have it on lowest speed try going up a speed. That may solve the problem.
2006-09-23 06:10:33
·
answer #3
·
answered by RoeB 5
·
0⤊
0⤋
Very humid contions and trying to force it to go lower than 20 degrees colder than the outside temp will do it. If it's 100 outside, only expect 80 inside. Even large units on houses can freeze up if you try to push them beyond what is reasonable.
2006-09-23 06:04:29
·
answer #4
·
answered by freaking_morons_ugh 3
·
0⤊
0⤋
Being that new, I would take a good look at the filter.
2006-09-24 06:49:50
·
answer #5
·
answered by Anonymous
·
0⤊
1⤋
More than likely it is low on gas, therefore it could (maybe) have a leak. Also you my be running it too hard.
2006-09-23 06:27:25
·
answer #6
·
answered by Kelly L 5
·
0⤊
1⤋
dirty coil dirty filter low refrigerant
2006-09-23 15:18:50
·
answer #7
·
answered by hill bill y 6
·
0⤊
1⤋